NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

74 Chapter4
Network Transport Configuration Screens
Transmission Control Protocol (TCP) Configuration
Transmission Control Protocol (TCP)
Configuration
The Transmission Control Protocol (TCP) Configuration screen (#94) in
Figure 4-6 is displayed when you press the
[Go To TCP] function key at
the General Protocol Configuration screen (Figure 4-4). It is also
displayed when you type the path name:
@NETXPORT.GPROT.TCP
in the command window of any screen and press the [Enter] key.
Figure 4-6 Transmission Control Protocol (TCP) Configuration Sxreen
This screen lets you enter the information necessary to configure
transmission control protocol (TCP) for the node. TCP is required in
order for the network transport to function. Press the
[Save Data]
function key to transfer the data displayed on the screen to the
configuration file you are creating or modifying. Verify that the data
record has been created by checking that the Data flag is set to Y.
This screen provides the necessary information for the operation of the
TCP protocol. The information configured falls into three categories:
• Reliability (checksum field).
• Sizing parameters (maximum connections fields).
• Performance parameters (retransmission fields).