NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

83
5 LAN Network Interface
Configuration Screens
The screens in this chapter are those you would see when configuring
IEEE 802.3/Ethernet LAN networks. These networks include 10Base-T,
100Base-T and 100VG-AnyLAN. Figure 5-1 shows the screen flow for
configuring the IEEE 802.3/Ethernet LAN screens. Screens unique to
the LAN are indicated by bold boxed screens.
[FUNCTION] denotes the
function key used at a screen to invoke the next screen on the screen
flow.
Figure 5-1 LAN Network Interface Configuration Screen Flow
Main Screen
Open Configuration
Directory File
Screen
NS Configuraiton
Unguided Configuration
Network Transport
Configuration
Selection
Network
Interface
Configuration
LAN Network
Interface Config
Address Resolution
Protocol (ARP) Config
Neighbor Gateway
Reachable Networks
LAN Network
Interface Link
Neighbor
Gateways
IP Protocol
Configuration
Probe Protocol
Configuration
Protocol
Configuration
If you have not created the
configuration file, then press
OPEN CONFIG key a second time.
[OPEN CONFIG]
[NS]
[UNGUIDED]
[GO TO NETXPORT]
[GO TO NI]
[ADD or MODIFY]
[GO TO PROBE]
[GO TO IP]
[GO TO INTERNET]
[ADD or MODIFY]
[GO TO LINK]
[GO TO PROTOCOL]
[GO TO ARP]