Owner manual

Chapter 13 Alternative Rack Mounting (4–Post)
108
operating efficiency. For more information, see “Rack Configuration Tools” later
in this chapter.
Tools Required
The following tools are required to rack-mount the HP Netserver.
• M10 socket Torx 25 driver
• Marking pen or masking tape (optional for marking the columns)
HP Netserver Rack Mount Parts List
Ensure the rack-mounting kit provided with the HP Netserver contains the
following parts:
Table 13-1. Parts for Rack Mount Kit
Quantity Description
2 Slides
1 Hardware kit for HP System racks
Rack Configuration Tools
The HP rack configuration tools, including white papers, are on HP's web site at
the following URL:
http://www.hp.com/netserver
At the Web site, search for the following:
• Configuration tools
• High density rack solutions
• Rack Assistant, Rack Configuration
• Order Assistant
• HP Netserver High Density Rack Solutions Overview (LP 1000r and LP
2000r)
You can read about the tools or download copies for installation. These tools can
be used to plan a rack configuration for the components in your system.
The white papers, specifically HP Netserver High Density Rack Solutions
Overview (LP 1000r and LP 2000r), provide rack information for HP Netservers
in the high density racks and additional information for rack systems not listed in
this manual. You will need this information to complete a rack system installation.