Manual

1
1 DiagTools Overview
Introduction to Hardware Diagnostic Tools
The purpose of hardware diagnostic software is to provide tools for checking serious hardware problems. By
design, offline diagnostics execute simple tests of each hardware component in turn. Usually, such tests
confirm that hardware is not the source of system problems. This allows the user to focus energy on
configuration problems, network problems, and software problems.
If hardware problems are confirmed, diagnostic tools can sometimes detect and diagnose their source. In
addition, diagnostic tools capture information that allows support agent to quickly assess the condition of
the system.
To be most effective, offline diagnostics must be used as a part of trouble-shooting procedure. (See Chapter
2 for more information on troubleshooting.)
DiagTools Requirements and Capabilities
DiagTools Requirements
Running DiagTools requires a system which is capable of booting up from a flexible diskette (floppy drive).
Three blank, formatted flexible diskettes may be required. Two diskettes are needed to run DiagTools in
graphical mode, and for use in saving the Support Ticket.
Systems Supported
DiagTools for HP NetServers is supplied on the HP NetServer Navigator CD-ROM
1
:
Table 1-1 NetServer Models and DiagTools Versions
DiagTools Version DT 1.00 and DT 1.02 DT 2.00
HP NetServer Navigator
CD ROM Version
L.14.00 - L.15.15
E.10.00, E.10.05
L.16.05
Systems Supported E45, E50, E60
LC 3
LH 3 and 3r,
LH 4 and 4r
LPr
LXr 8000
LC 3
LH 3 and 3r,
LH 4 and 4r
LPr
LXr 8000
Notes
1
If a system is not supported, when you attempt to run DiagTools, a message is
displayed:
System Not Supported
2
Consult the readme file named readme.txt (on the DiagTools diskette or use the MISC
menu in the Advanced screen), to determine which systems (and corresponding BIOS
versions) are supported by a particular version of DiagTools. (See “How to Make a
DiagTools Diskette with a Windows System” in Chapter 2.)