Owner manual

Chapter 1 Controls, Ports and Indicators

The Netserver supports certain types of system activity, which is used as wake-up

events from these sleep states. These wake-up events can be generated from the

power button, LAN activity, and scheduled events.

NOTE The HP Netserver’s power management policies (transitions

between various power states) and the user options are specific

to the particular ACPI-compliant NOS installed on the

Netserver. If your NOS is ACPI-compliant, refer to the power

management features in the instructions provided for more

information.

The HP Netserver’s power button can be configured to initiate a graceful

shutdown of the NOS rather than an immediate shutdown of the power supply.

The power button configurations are dependent on the user interface provided by

the ACPI-compliant NOS. While power management is under the control of the

ACPI-compliant NOS, the HP Netserver’s power button is capable of an override

in case of a non-responsive NOS.

NOTE The HP Netserver power button will force a power-down

without waiting for the NOS to gracefully shut down the

Netserver, if the power button is pressed and held more than

four seconds.

CAUTION If the power button override is used, there is a strong

possibility that data will be corrupted or lost.