User guide

2. The BladeSystem Migration Tool lists the enclosures monitored by this EMS and asks whether

to migrate the selected enclosures.

To migrate the selected enclosures, enter Yes.

NOTE: If you select No, the migration tool exits.

The migration tool does not allow you to select individual enclosures to migrate.

3. The tool migrates the enclosures configuration information from the EMS to the DMS.

When the migration is complete, the tool asks you to use the DMC to confirm that the enclosures

are listed.

For information about this step, see the HP Device Monitor for Microsoft System Center User

Guide.

TIP: Enclosure migration fails if the DMS is unable to connect to an enclosure during the

migration process. Check the connection for enclosures that have not migrated successfully

and attempt the migration again.

This example shows sample output for the HP BladeSystem Migration Tool when migrating data

from an EMS to a DMS on a different server.

HP BladeSystem Migration Tool

Version 1.1.0.0

HP BladeSystem Migration Tool has detected a previous version of HP BladeSystem

Monitor Service Installed on this system.

The following enclosures are currently managed:

192.168.11.34

192.168.11.58

Would you like to migrate all managed enclosures to the remote HP Device Monitor

Service 192.168.51.107? [Yes/No] Yes

Migrating 192.168.11.34 ... Done [SUCCESS]

Migrating 192.168.11.58 ... Done [SUCCESS]

HP BladeSystem Migration Tool has successfully migrated 2 enclosures. Please use

HP Device Monitor Console to confirm.

Using the HP BladeSystem Migration Tool 21