Administrator's Guide
Install the HP SAM Registration Service
●
Log in to the blade PC using an account with local administrative rights, and then run the
bladeservice_xx##.MSI file (## is the software version). Replace xx with
◦
EN = English
◦
JA = Japanese
◦
FR = French
◦
DE = German
◦
KO = Korean
◦
ZH-CN = Simplified Chinese
●
For Red Hat Linux, extract the HP SAM Linux Registration Service tar.gz package onto the system
by executing this command: tar xzvf <name of file.tar.gz>.
Next, run ./install.sh to install the package.
●
If necessary, stop the service by going to Control Panel > Administrative Tools > Services, and
look for HP SAM Registration Service. If it is running, stop it. For Linux, enter the following command
in the terminal: /etc/init.d/daesvc stop.
●
Customize the service .CFG file. Edit the hpevent.cfg-sample file. For details about how to
customize this file, see
Create the HP SAM Registration Service Configuration File on page 31.
●
After you customize the configuration file (required—see
Create the HP SAM Registration Service
Configuration File on page 31), rename (or Save As) the sample file to hpevent.cfg.
●
Start the HP SAM registration service by going to Control Panel > Administrative Tools >
Services, and start the service under the name HP SAM Registration Service. For Linux, enter the
following command in the terminal: /etc/init.d/daesvc start.
●
If the computing resource has a firewall, enable the ports below.
◦
Incoming:
- From Web server (UDP/47777) to blade (UDP/47777)
- From Web server (TCP/ANY) to blade (TCP/139)
- From access devices (TCP/ANY) to blade (TCP/3389)—RDP
- From access devices (TCP/ANY) to blade (TCP/42966)—RGS
NOTE: The default RGS port is TCP/42966; however, RGS 5.3 and later allows this to be
changed. Please see the RGS documentation for details.
◦
Outgoing:
- From blade (TCP/ANY) to Web server (TCP/80—HTTP)
- From blade (UDP/47777) to Web server (UDP/47777)
NOTE: Another way to enable the port is to enable the software service itself. Follow the firewall
instructions to enable the HP SAM Registration Service software.
30 Chapter 3 Installation ENWW