Administrator's Guide

Start/Restart the HP SAM Registration Service
You can start or stop the service from the services applet (Control Panel > Administrative Tools >
Services) or from the command line.
●
Under the services applet, the service displays as HP SAM Registration Service.
●
Additionally, you can start or stop the service from the command line using the syntax:
C:> net start daesvc
and
C:> net stop daesvc
You can also start or stop the service using tools such as HP Rapid Deployment Pack. See the HP
Rapid Deployment Pack documentation for instructions.
You can start and stop the Linux blade service using the syntax:
/etc/init.d/daesvc start
and
/etc/init.d/daesvc stop
Test the HP SAM Registration Service
Log into the HP SAM administrator console, click on the Resources tab, and search for the computing
resource within the role it was assigned.
●
If the computing resource was not found, check the firewall settings and make sure that the service
was started on that computing resource.
●
If the computing resource is found, select the Resources tab and select Synchronize from the
Operation list and click Go.
NOTE: If the computing resource is marked off-line after the synchronize operation, this typically
means the HP SAM Web server is unable to communicate to the computing resource. Check the firewall
setting on the computing resource to make sure it allows incoming on port 47777 or the HP SAM
registration service. You can find out if the firewall is blocking the necessary traffic by disabling the
firewall temporarily and then enabling it again later.
Install and Validate the HP SAM Client Software
HP SAM includes the following clients:
●
Internet Explorer-based client
●
Windows XPe-based client
●
Blade Workstation Client series
●
Linux-based Client
The HP SAM client requires that RGS (on the Windows XPe-based client, Blade Workstation Client
series, or Linux Client) and/or Remote Desktop Connection or rdesktop for Linux (all clients except the
Blade Workstation Client series) be functional on the access device.
ENWW Install and Validate the HP SAM Client Software 33