Owner's manual

Hardware options installation 28

Install the DIMM.

7. Install the air baffles.

8. Install the access panel (on page 14).

9. Install the server blade ("Installing a server blade" on page 16).

Mezzanine card option

Optional mezzanine cards are classified as Type I mezzanine cards and Type II mezzanine cards. The

card type determines where it can be installed in the server blade.

• Install Type I mezzanine cards on either mezzanine 1 connector or mezzanine 2 connector.

• Install Type II mezzanine cards only on mezzanine 2 connector.

Optional mezzanine cards enable network connectivity and provide Fibre Channel support. For

mezzanine card locations, see the system board components (on page 9).

For mezzanine card signal mapping, see the HP ProLiant BL465c Generation 5 Server Blade Installation

Instructions that ship with this server blade.

To install the component:

1. Power down the server blade (on page 12).

2. Remove the server blade (on page 13).

3. Remove the access panel (on page 13).