Support Pack Instruction Manual

Introduction 8
• The beginning and ending IP addresses entered for the range of hosts (targets) must be on the same
subnet.
• To install firmware on HP Integrity BL860c/BL870c/BL890c i2 Servers, you must run HP SUM from
an x86 or x86 Linux machine. You cannot deploy firmware on a Windows Integrity system from a
Windows Integrity system.
NOTE: HP Smart Update Manager requires a true Administrator login and not an elevated
RUN AS Administrator. If you are unable to perform the net use * \\server\ADMIN$ for
Microsoft Windows® target servers, you do not have sufficient privileges to run HP Smart
Update Manager.
NOTE: When attempting to use the remote deployment functionality of HP SUM on any
edition of Windows Server® 2008 or Windows Vista®, you must ensure that the File and
Print Services feature is enabled and that the File and Print Services exception has been
enabled in the Windows® firewall. Failure to do so prevents HP SUM from deploying remote
Windows® target servers.
For more information about PSP, see the HP ProLiant Support Pack for Windows and Linux User Guide on
the HP website
(http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManu
al&lang=en&cc=us&docIndexId=64179&taskId=101&prodTypeId=18964&prodSeriesId=345557).
For more information about ISP implementation by operating system, see the HP Window-on-Integrity
website (http://www.hp.com/go/windows-on-integrity-docs
), or by server model number, see the HP
Integrity Server site (http://www.hp.com/go/integrity_servers-docs
).
For more information on HP Smart Update Firmware - HP Integrity BL860c/BL870c/BL890c i2 Servers
Bundles, see the HP Integrity and HP 9000 firmware update options on the HP web site
(http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c003
99523&jumpid=reg_R1002_USEN).
Minimum requirements for Linux x86 servers
To successfully deploy HP SUM on ProLiant target systems based on a Linux operating system, the
following must be available: (HP SUM does not support Linux on HP Integrity systems.)
• A local administrative system with 512 MB of memory
• glibc 2.2.4-26 or later
• gawk 3.1.0-3 or later
• sed 3.02-10 or later
• pciutils-2.1.8-25.i386.rpm or later
To successfully deploy HP SUM on remote target systems based on a Linux operating system, the
following must be available:
• tcl-8.x package
• expect-5.x package
Starting with Linux PSP 8.40 and later, ensure the following platform-specific compatibility libraries are
also installed.
• For Red Hat Enterprise Linux 4x86 servers: