User guide

CONREP command line arguments
DescriptionCommand-line argument
This argument saves the system configuration to a file.
-s
This argument loads the system configuration from a file
and writes it to the target server.
-l
This argument defines the name and location of the XML
hardware definition file. The default file is conrep.xml.
-xfilename
This argument defines the name and location of the system
configuration data file. The default file is conrep.dat.
-ffilename
This argument displays help information.
-?
CONREP return codes
MeaningValue
The command was completed successfully.
0
The hardware definition data file (conrep.xml) is corrupt
or not found.
1
The system configuration data file (conrep.dat) is corrupt
or not found.
2
The Health Driver is required for this operation but is not
loaded.
3
The system administrator password is set. The settings
cannot be changed unless this password is cleared.
4
The XML hardware definition file (conrep.xml) is corrupt
or not appropriate for the current platform.
5
CONREP screen output
A typical screen output generated by CONREP is similar to the following:
conrep 3.00 - Scripting Toolkit Configuration Replication Program
Copyright (c) 2007-2012 Hewlett-Packard Development Company, L.P.
System Type: ProLiant DL360 G4
ROM Date: 08/16/2005
ROM Family: P52
XML System Configuration: conrep.xml
Hardware Configuration: demo.dat
File contains global platform restrictions
Global Restriction: [minimumconrepversion] OK
Platform check:
[ProLiant DL3] match
[ProLiant DL5] no match
Saving configuration data to demo.dat.
CONREP Return code: 0
Using CONREP 25