User guide

PreferredPathMode = Auto|Manual

; COMMENT: the following five entries are used to optimize the

controller performance for video

MNPDelay = 0|1|2|...|60 ; units are minutes, zero indicates disabled

IRPEnable = Yes|No

DPOEnable = Yes|No

ElevatorSortEnable = Yes|No

QueueDepth = 2|4|8|16|32|Auto

Array = A|B|C|D|E|F|G|...Z|a|b|c|d|e|f

OnlineSpare = None | N | Port:ID,Port:ID... | Box:Bay,Box:Bay... |

Port:Box:Bay,Port:Box:Bay,... ; COMMENT: These values are available

only in Custom method mode. In Auto method mode, the choices are

Yes|No.

Drive = * | N | Port:ID,Port:ID... | Box:Bay,Box:Bay... |

Port:Box:Bay,Port:Box:Bay,...

DriveType = SCSI | SAS | SATA

LogicalDrive = 1|2|3|...32

RAID = 0|1|5|50|6|60|adg|auto ; COMMENT: RAID 6 and 60 are only

available when SAAP is installed and the license key registered

ParityGroups = 2|N ; COMMENT: Necessary only for RAID 50 or 60. N

> 2

Size = [N]|Max

Sectors = 32|63

StripeSize = 8|16|32|64|128|256

ArrayAccelerator = Enable|Disable

LogicalDriveSSPState = Enable|Disable

SSPAdaptersWithAccess = [N],[N]...|None

PreferredPath = 1|2

HBA_WW_ID = WWN

ConnectionName = UserDefinedName

Linux | Solaris | Netware | HP | Windows Sp2 ; COMMENT: The

Windows(degrade value must be entered as written.

Script file options

Options in ACU script files are divided into the following categories:

• “Control category” (page 33)

• “Controller category” (page 34)

• “Array category” (page 37)

• “Logical Drive category” (page 38)

• “HBA category” (page 40)

Each category has several scripting options, but you do not always need to assign values to every

option. ACU can use default values in some instances, while in other instances, a listed option

might not be relevant for a particular configuration or scripting mode.

32 Scripting Toolkit utilities