User guide

<serial_port mode="dedicated" />
<nic mode="dhcp">
<ipv4 address="10.10.10.18" mask="255.255.252.0" gateway="10.10.10.1" />
<firewall http_active="yes" ping_active="yes" telnet_active="yes" />
</nic>
<users>
<user id="1" name="" privilege_level="user" />
<user id="2" name="operator" privilege_level="operator" />
<user id="3" name="admin" privilege_level="admin" />
<user id="4" name="oem" privilege_level="oem" />
</users>
</lo100cfg>
To disable the shared NIC configuration and make the Lights-Out 100 NIC dedicated, enter the
following in your data file:
<lo100cfg>
<nic type="dedicated" />
</lo100cfg>
Using HPQLAREP
You must edit the text file to insert the WWID of the boot volume and the LUN number that they
will boot from. The hpqlarep utility discovers the WWID of the HBA in the server blade and
writes the information in the text file. The text file presents the options in human readable format.
The hpqlarep utility updates the hardware with the boot volume WWID and boot LUN read from
the text file.
HPQLAREP command-line syntax
hpqlarep /s filename hpqlarep /l filename
[HBA0] WWID=11223344 HostAdapterBiosEnable=1 SelectBootEnable=1
BootDeviceWWID=22334455 BootDeviceLUN[0]=1111
HPQLAREP command-line arguments
DescriptionCommand-line argument
This argument saves the HBA configuration to the filename.
hpqlarep /s filename
This argument loads the HBA configuration to the filename.
hpqlarep /l filename
Where filename has the following format:
Section for each HBA
[HBA0]
Read-only variable
WWID=11223344
Read-only variable
HostAdapterBiosEnable=1
Read-only variable
SelectBootEnable=1
Your input
BootDeviceWWID=22334455
Your input and default LUN
BootDeviceLUN[0]=1111
48 Scripting Toolkit utilities