User guide

<DHCP_STATIC_ROUTE VALUE = "Y"/>

<DHCP_WINS_SERVER VALUE = "Y"/>

<REG_WINS_SERVER VALUE = "Y"/>

<PRIM_WINS_SERVER value = "16.16.6.161"/>

<STATIC_ROUTE_1 DEST = "0.0.0.0" GATEWAY = "0.0.0.0"/>

<STATIC_ROUTE_2 DEST = "0.0.0.0" GATEWAY = "0.0.0.0"/>

<STATIC_ROUTE_3 DEST = "0.0.0.0" GATEWAY = "0.0.0.0"/>

</MOD_NETWORK_SETTINGS>

<ADD_USER

USER_NAME = "Administrator"

USER_LOGIN = "Administrator"

PASSWORD = "">

</ADD_USER>

<ADD_USER

USER_NAME = "Landy9"

USER_LOGIN = "mandy9"

PASSWORD = "">

</ADD_USER>

<RESET_RIB VALUE = "Y"/>

</HPONCFG>

For security reasons, the user passwords are not returned.

Obtaining a specific configuration

A specific configuration can be obtained using the appropriate XML input file. For example, the

contents of a typical XML input file, get_global.xml, are the following:

<RIB_INFO MODE="read">

<GET_GLOBAL_SETTINGS />

</RIB_INFO>

</LOGIN>

</RIBCL>

The XML commands are read from the input file

get_global.xml

and are processed by the device:

HPONCFG /f get_global.xml /l log.txt > output.txt

The requested information is returned in the log file, which, in this example, is named log.txt.

The contents of the log file are as follows:

<GET_GLOBAL_SETTINGS>

<SESSION_TIMEOUT VALUE="30"/>

<ILO_FUNCT_ENABLED VALUE="Y"/>

<F8_PROMPT_ENABLED VALUE="Y"/>

<REMOTE_CONSOLE_PORT_STATUS VALUE="3"/>

<REMOTE_CONSOLE_ENCRYPTION VALUE="N"/>

<PREFER_TERMINAL_SERVICES VALUE="N"/>

<HTTPS_PORT VALUE="443"/>

<HTTP_PORT VALUE="80"/>

52 Scripting Toolkit utilities