User's Guide

/dev/rdsk/c6t12d0 /dev/rdsk/c9t12d0
HORCM_DEV
#dev_group dev_name port# TargetID LU# MU#
dg12 dg12_d0 CL3-E 6 5
#Phantom device group dg13
dg13 dg13_d0 CL3-E 6 5 h2
HORCM _INST
#dev_group ip_address service
dg12 NodeB.dc2.net horcm0 # communicate with DC2 nodes
dg13 NodeC.dc3.net horcm0 # communicate with DC3 nodes
Sample Raid Manager Configuration on a DC2 NodeB (multi-hop-Bi-Link)
HORCM _MON
#ip_address service poll(10ms) timeout(10ms)
NodeB horcm0 1000 3000
HORCM_CMD
#dev_name dev_name dev_name
/dev/rdsk/c21t8d0 /dev/rdsk/c24t8d0
HORCM_DEV
#dev_group dev_name port# TargetID LU# MU#
dg12 dg12_d0 CL1-A 13 1
dg23 dg23_d0 CL1-A 13 1 h1
HORCM _INST
#dev_group ip_address service
dg12 NodeA.dc1.net horcm0 # communicate with DC1 nodes
dg23 NodeC.dc3.net horcm0 # communicate with DC3 nodes
Sample Raid Manager Configuration on a DC3 NodeC (multi-hop-Bi-Link)
HORCM _MON
#ip_address service poll(10ms) timeout(10ms)
NodeC horcm0 1000 3000
HORCM_CMD
#dev_name dev_name dev_name
/dev/rdsk/c6t2d0 /dev/rdsk/c8t2d0
HORCM_DEV
#dev_group dev_name port# TargetID LU# MU#
dg23 dg23_d0 CL2-A 0 5 h1
#Phantom device group dg13
dg13 dg13_d0 CL2-A 0 5 h2
HORCM _INST
#dev_group ip_address service
dg23 NodeB.dc2.net horcm0 # communicate with DC2 nodes
dg13 NodeA.dc1.net horcm0 # communicate with DC1 nodes
Tri-Link RAID Manager Configuration
The sample RAID Manager configuration files on DC1, DC2, and DC3 nodes for Tri-Link
configuration when using 3DC CAJ/CAJ replication are shown below. The RAID Manager
configuration for Tri-Link configuration when using 3DC Sync/CAJ replication also remains
same except for the MU#s mentioned for the device groups.
Configuring an P9000 or XP 3DC DR Solution 435