Security Solutions

ManualsBrandsHP ManualsSoftwareHP Serviceguard Metrocluster

111

112

113

114

115

116

117

118

119

120

#### #### wish to monitor the recovery cluster, you #### ####

#### #### must delete or comment out the #### ####

#### #### MONITOR_PACKAGE_NAME and MONITOR_INTERVAL #### ####

#### #### lines that follow the name of the primary #### ####

#### #### cluster. #### ####

#### #### After the monitor package name, enter a #### ####

#### #### monitor interval,specifying a number of #### ####

#### #### minutes and/or seconds. The default is 60 #### ####

#### #### seconds, the minimum is 30 seconds, and the #### ####

#### #### maximum is 5 minutes. #### ####

#### #### #### ####

#### #### CLUSTER_NAME westcoast #### ####

#### #### CLUSTER_DOMAIN westnet.myco.com #### ####

#### #### NODE_NAME system1 #### ####

#### #### NODE_NAME system2 #### ####

#### #### MONITOR_PACKAGE_NAME ccmonpkg #### ####

#### #### MONITOR_INTERVAL 1 MINUTE 30 SECONDS#### ####

#### #### #### ####

#### #### CLUSTER_NAME eastcoast #### ####

#### #### CLUSTER_DOMAIN eastnet.myco.com #### ####

#### #### NODE_NAME system3 #### ####

#### #### NODE_NAME system4 #### ####

#### #### MONITOR_PACKAGE_NAME ccmonpkg #### ####

#### #### MONITOR_INTERVAL 1 MINUTE 30 SECONDS #### ####

#### #### #### ####

#### #### CONTINENTAL_CLUSTER_NAME ccluster1 #### ####

#### #### CONTINENTAL_CLUSTER_STATE_DIR #### ####

#### #### CLUSTER_NAME #### ####

#### #### CLUSTER_DOMAIN #### ####

#### #### NODE_NAME #### ####

#### #### MONITOR_PACKAGE_NAME ccmonpkg #### ####

#### #### MONITOR_INTERVAL 60 SECONDS #### ####

#### #### CLUSTER_NAME #### ####

#### #### CLUSTER_DOMAIN #### ####

#### #### NODE_NAME #### ####

#### #### MONITOR_PACKAGE_NAME ccmonpkg #### ####

#### #### MONITOR_INTERVAL 60 SECONDS #### ####

Section 2 of the Continentalclusters ASCII configuration file

###############################################################

#### #### Section 2. Recovery Groups #### ####

#### #### This section defines recovery groups--sets #### ####

#### #### of ServiceGuard packages that are ready to #### ####

#### #### recover applications in case of cluster #### ####

#### #### failure. Recovery groups allow one cluster #### ####

#### #### in the Continentalclusters configuration to #### ####

#### #### back up another member cluster's packages. #### ####

#### #### You create a separate recovery group for #### ####

#### #### every ServiceGuard package that #### ####

#### #### started on the recovery cluster when the #### ####

#### #### cmrecovercl(1m) command is issued. #### ####

#### #### #### ####

#### #### A recovery group consists of a primary #### ####

#### #### package running on one cluster, a recovery #### ####

#### #### package that is ready to run on a different #### ####

#### #### cluster. In some cases, a data receiver #### ####

#### #### package runs on the same cluster as the #### ####

#### #### recovery package, and in some cases, a data #### ####

#### #### sender package runs on the same cluster #### ####

#### #### as the primary package.For rehearsal #### ####

#### #### operations a rehearsal package forms a part #### ####

116 Sample Continentalclusters ASCII configuration file