Security Solutions

6. Run the package on a node in the Serviceguard cluster.
# cmrunpkg -n <node_name> <package_name>
7. Enable global switching for the package.
# cmmodpkg -e <package_name>
Configuring the primary and recovery packages as modular packages when using
3PAR Remote Copy
When using HP 3PAR Remote Copy in Continentalclusters, the primary and recovery packages
must be created using the dts/cc3parrc module. To use this module, Metrocluster with 3PAR
Remote Copy must be installed on all the nodes in the Continentalclusters.
To configure the primary and recovery packages as modular packages using 3PAR Remote Copy
with Continentalclusters:
1. Run the following command to create a modular primary or recovery package configuration
file using the Continentalclusters module dts/cc3parrc:
# cmmakepkg –m dts/cc3parrc pkgName.config
NOTE: Continentalclusters is usually used with applications such as Apache. So, the
application toolkit module must also be included when Continentalclusters is used in conjunction
with an application.
For Example, when Continentalclusters is used in conjunction with the Apache toolkit, the
Apache toolkit module and other required modules must also be included with the
Continentalcluster module. Run the following command:
# cmmakepkg –m dts/cc3parrc –m sg/filesystem -m sg/package_ip -m
tkit/apache/apache temp.config
2. Edit the following attributes in the pkgName.config file:
• AUTO_RUN
Set the value of this parameter to no.
• DTS_PKG_DIR
This is the package directory for the modular package. This value must be unique for all
the packages.
• DC1_NODE_LIST
The cluster nodes which resides in Data Center 1.
• DC2_NODE_LIST
The cluster nodes which resides in Data Center 2.
• DC1_STORAGE_SYSTEM_NAME
The DNS resolvable name or IP address of the HP 3PAR storage system, which is located
in Data center 1.
• DC2_STORAGE_SYSTEM_NAME
The DNS resolvable name or IP address of the HP 3PAR storage system, which is located
in Data center 2.
• DC1_STORAGE_SYSTEM_USER
The user on the HP 3PAR storage system, which is located in Data Center 1.
• DC2_STORAGE_SYSTEM_USER
The user on the HP 3PAR storage system, which is located in Data Center 2.
20 Building the Continentalclusters configuration