White Paper

This IP address is the relocatable IP address for the package. NFS clients that mount

the file systems in the package use this IP address to identify the server. You must

configure a name for this address in the DNS, NIS, or LDAP database, or in the

/etc/hosts file.

b) Set the exported directory in nfs1.conf as follows:

For nfs1.conf generated on HP Serviceguard A.11.18:

XFS “/cfs1”

For nfs1.conf generated on HP Serviceguard A.11.19:

nfs/hanfs_export/XFS “/cfs1”

In nfs2.conf, set the exported directory to “/cfs2”.

c) By default the service_name is enabled and is set to nfs.monitor. If you want to

monitor NFS services by running the NFS monitor script, then change nfs.monitor to a

unique name for each package.

service_name nfs1.monitor

service_cmd "$SGCONF/scripts/nfs/nfs_upcc.mon"

service_restart none

service_fail_fast_enabled no

service_halt_timeout 0

In nfs2.conf, set the service_name variable to nfs2.monitor. If you do not want to

monitor NFS services, comment out the service_name, service_cmd, service_restart,

service_fail_fast_enabled and service_halt_timeout variables.

d) To enable File Lock Migration, set the FILE_LOCK_MIGRATION variable to 1:

For nfs1.conf generated on HP Serviceguard A.11.18:

FILE_LOCK_MIGRATION 1

For nfs1.conf generated on HP Serviceguard A.11.19:

nfs/hanfs_export/FILE_LOCK_MIGRATION 1

e) The FLM_HOLDING_DIR variable defines the holding directory associated with the

package. Specify the FLM_HOLDING_DIR as below:

For nfs1.conf generated on HP Serviceguard A.11.18:

FLM_HOLDING_DIR "/cfs1/sm"

For nfs1.conf generated on HP Serviceguard A.11.19:

nfs/hanfs_flm/FLM_HOLDING_DIR "/cfs1/sm"

In nfs2.conf, set the variable to “/cfs2/sm”.

f) Specify the package name: