HP Slate User Guide
© Copyright 2010 Hewlett-Packard Development Company, L.P. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. DuoSense is a registered trademark of N-trig Ltd. Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation. SD Logo is a trademark of its proprietor. The information contained herein is subject to change without notice.
Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the Slate, do not place the Slate directly on your lap. Use the Slate only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to contact the skin or a soft surface, such as pillows or rugs or clothing, during operation.
iv Safety warning notice
Table of contents 1 Getting started ................................................................................................................................................ 1 Finding more information about your new Slate ................................................................................... 2 Using the touch screen, on-screen keyboard, and digital pen ............................................................. 3 Tapping ................................................................
Connecting to an existing WLAN ....................................................................................... 20 Setting up a new WLAN ..................................................................................................... 20 Protecting your WLAN ....................................................................................................... 21 Roaming to another network ..............................................................................................
Inserting a digital card ........................................................................................................ 36 Removing a digital card ..................................................................................................... 37 Using a USB device ........................................................................................................................... 37 Connecting a USB device ................................................................................
viii
1 Getting started Your Slate's main operating system is Microsoft® Windows® 7 Professional. The Microsoft Windows operating system displays the desktop on the display and controls your Slate's hardware, peripherals, and software programs.
Finding more information about your new Slate The following user guides and reference material are provided with your Slate, either in print or on the Slate hard drive: ● Quick Setup poster—Guides you through setting up your Slate and turning it on. The poster is located in the box. NOTE: Refer to the poster for the location of your user guides and reference material.
Using the touch screen, on-screen keyboard, and digital pen You can use your fingers to perform most actions on the touch screen. NOTE: The instructions in this section are based on the preferences set at the factory. To modify settings for recognized taps and flicks, refer to “Setting touch screen preferences.” NOTE: Some gestures are not supported in all programs. Tapping Tap or double-tap an item on the screen as you would click or double-click with an external mouse.
Scrolling Scrolling is useful for moving up and down or left and right on a page or image. To scroll, place two fingers slightly apart on the screen, and then drag them across the screen in an up, down, left, or right motion. NOTE: Scrolling speed is controlled by finger speed. Rotating Rotating allows you to rotate items such as photos and pages. To rotate, anchor your thumb on the screen, and then move your forefinger in a semicircular motion around your thumb.
Pinching Pinching allows you to zoom in or out on items such as PDFs, images, and photos. To pinch: ● Zoom out by holding two fingers apart on the screen, and then pull the fingers together to decrease an object's size. ● Zoom in by holding two fingers together on the screen, and then pull the fingers apart to increase an object's size. Setting touch screen preferences To change or test tap settings: 1. Tap Start > Control Panel. 2.
These preferences are specific to the touch screen and the Slate. To change or create flick assignments: 1. Tap Start > Control Panel. 2. Tap Hardware and Sound > Pen and Touch > Flicks tab. 3. Tap Navigational flicks and editing flicks, and then tap Customize. 4. Follow the on-screen instructions to change or create a flick assignment. 5. Tap OK. Using the on-screen keyboard Occasionally you may need to enter data into a data field.
On-screen keyboard options To select options for the on-screen keyboard, tap Tools at the top of the keyboard, and then select one of the following options: ● Show expanded keyboard—Displays the expanded keyboard. ● Docking—Allows you to select the location where the on-screen keyboard displays. ◦ Float—Allows you to reposition the on-screen keyboard by tapping the top of the keyboard window and dragging it to the desired location.
3. Replace the cap (2) on the pen. 4. Turn the cap in a clockwise direction (3) to tighten it. The digital pen is now ready to use with your HP Slate. Simply touch the tip of the pen lightly on the screen to write text or select items on the screen. To perform a right-click action, press the button on the side of the pen when selecting an item on the screen. The digital pen uses inherent pressure sensitivity, so you can create a bolder stroke by pressing harder on the screen with the digital pen.
Changing your Slate's view Your Slate's orientation, or view, changes automatically from landscape to portrait view, or from portrait to landscape view. 1. To change the view of your Slate from landscape view to portrait view: Hold the Slate vertically, and then turn it 90 degrees to the right (in a clockwise direction). 2. To change the view of your Slate from portrait view to landscape view: Hold the Slate vertically, and then turn it 90 degrees to the left (in a counter-clockwise direction).
Description Landscape Portrait 10 Chapter 1 Getting started View
2 Knowing the parts Identifying the hardware Components included with the Slate may vary by region and model. The illustrations in this chapter identify the standard features on most Slate models. To see a list of hardware installed in the Slate: 1. Tap Start > Control Panel. 2. Tap System and Security, tap System, and then tap Device Manager. You can also add hardware or modify Slate configurations using Device Manager.
Bottom-edge components Component Description (1) Speakers (2) Produce sound. (2) Power connector Connects an AC adapter or an HP Slate Dock. Right-edge components Component (1) Description Audio-out (headphone)/Audio-in (microphone) combo jack Produces sound when connected to optional powered stereo speakers, headphones, earbuds, a headset, or television audio. Also connects an optional headset microphone. NOTE: When an audio component is connected to the jack, the Slate's speakers are disabled.
Component (4) Description Power switch ● When the Slate is off, slide the switch down to turn on the Slate. ● When the Slate is on, briefly slide the switch down to initiate Sleep. ● When the Slate is in the Sleep state, briefly slide the switch down to exit Sleep. ● When the Slate is in Hibernation, briefly slide the switch down to exit Hibernation.
Left-edge components Component Description (1) Internal microphone Records sound. (2) Keyboard button When the Slate is on, press the button to display the on-screen keyboard.
Component Description (3) Volume down button ● (4) Keyboard button When the Slate is on, press the button to display the on-screen keyboard. Press - to decrease speaker volume. Display components Component (1) Description Inward camera Records video and captures still photographs.
Rear components Component (1) Description Outward camera Records video and captures still photographs. Wireless antennas Component Description WLAN antennas (2)* Send and receive wireless signals to communicate with wireless local-area networks (WLANs). *The antennas are not visible from the outside of the Slate. For optimal transmission, keep the areas immediately around the antennas free from obstructions.
To see wireless regulatory notices, refer to the section of the Regulatory, Safety, and Environmental Notices that applies to your country or region. Tap Start > All Programs > HP > HP Documentation. Additional hardware components Component Description (1) 30W AC adapter* Converts AC power to DC power. (2) Power cord* Connects an AC adapter to an AC outlet. *AC adapters and power cords vary in rating and appearance by region and country.
◦ Warranty period (4). This number describes the duration (in years) of the warranty period for this Slate. ◦ Model description (select models) (5). This is an alphanumeric identifier that you use to locate documents, drivers, and support for your Slate. Have this information available when you contact technical support. The serial number label is located inside the label tray of your Slate. 18 ● Microsoft® Certificate of Authenticity—Contains the Windows® Product Key.
3 Networking (select models only) Your Slate supports wireless Internet access. For mobile Internet access, you can use a wireless connection. Creating a wireless connection Your Slate may be equipped with one or more of the following wireless devices: ● Wireless local area network (WLAN) device ● Bluetooth® device For more information on wireless technology, refer to the information and Web site links provided in Help and Support.
Using a WLAN A wireless connection connects the Slate to Wi-Fi networks, or WLANs. A WLAN is composed of other computers and accessories that are linked by a wireless router or a wireless access point. Connecting to an existing WLAN To connect to the WLAN, follow these steps: 1. Be sure that the WLAN device is on. 2. Tap the Wireless icon in the notification area, at the far right of the taskbar. 3. Tap your WLAN from the list. 4. Tap Connect.
NOTE: When setting up a wireless connection, be sure that your Slate and wireless router are synchronized. To synchronize your Slate and wireless router, turn your Slate and wireless router off and then back on. As your network grows, additional wireless and wired devices can be connected to the network to access the Internet. For help in setting up your WLAN, refer to the information provided by your router manufacturer or your ISP.
Using Bluetooth wireless devices A Bluetooth device provides short-range wireless communications that replace the physical cable connections that traditionally link electronic devices such as the following: ● Computers ● Phones ● Imaging devices (cameras and printers) ● Audio devices Bluetooth devices provide peer-to-peer capability that allows you to set up a personal area network (PAN) of Bluetooth devices.
4 Multimedia Your Slate may include the following: ● Integrated speakers ● Integrated microphone ● Integrated cameras ● Preinstalled multimedia software Identifying your multimedia components The following illustration and table describe the multimedia features of the Slate. Component (1) Description Outward camera Records video and captures still photographs. NOTE: To capture still photos and record video, you can use the HP Slate Camera software.
Component (3) Description Audio-out (headphone)/Audio-in (microphone) combo jack Produces sound when connected to optional powered stereo speakers, headphones, earbuds, a headset, or television audio. Also connects an optional headset microphone. NOTE: When an audio component is connected to the jack, the Slate's speakers are disabled. The audio component cable must have a 4-conductor connector. (4) 24 Speakers (2) Chapter 4 Multimedia Produce sound.
Audio Your Slate has a variety of audio features that allow you to: ● Play music using your Slate's speakers and/or connected external speakers. ● Record sound using the internal microphone or an optional external headset microphone. ● Download music from the Internet. ● Create multimedia slideshows and presentations using audio and images. ● Transmit sound and images with instant messaging programs.
Checking audio functions on the Slate To check the audio functions on your Slate, follow these steps: 1. Tap Start > Control Panel. 2. Tap Hardware and Sound, and then tap Sound. 3. When the Sound window opens, tap the Sounds tab. Under Program Events, tap any sound event, such as a beep or alarm, and then tap the Test button. You should hear sound through the speakers or through connected headphones. To check the record functions of the Slate, follow these steps: 1.
Cameras Your Slate includes an outward integrated camera and an inward integrated camera. The cameras are input devices that allow you to record video and capture still photographs. NOTE: For more information, refer to the HP Slate Camera software Help.
5 Power management Shutting down the Slate CAUTION: Unsaved information will be lost when the Slate is shut down. The Shut down command closes all open programs, including the operating system, and then turns off the display and Slate. Shut down the Slate when the Slate is unused and disconnected from external power for an extended period. Although you can shut down the Slate with the power switch, the recommended procedure is to use the Windows Shut down command.
When Hibernation is initiated, your work is saved to a hibernation file on the hard drive and the Slate turns off. CAUTION: To prevent possible audio and video degradation, loss of audio or video playback functionality, or loss of information, do not initiate Sleep or Hibernation while reading from or writing to a disc or an external media card. NOTE: You cannot initiate any type of networking connection or perform any Slate functions while the Slate is in the Sleep state or in Hibernation.
Using the power meter The power meter is located in the notification area, at the far right of the taskbar. The power meter allows you to quickly access power settings, view remaining battery charge, and select a different power plan. ● To display the percentage of remaining battery charge and the current power plan, tap the Power Meter icon. ● To access Power Options, or to change the power plan, tap the Power Meter icon, and then select an item from the list.
Customizing power plans 1. Tap the Power Meter icon in the notification area, and then tap More power options. – or – Tap Start > Control Panel > System and Security > Power Options. 2. Tap a power plan, and then tap Change plan settings. 3. Change the settings as needed. 4. To change additional settings, tap Change advanced power settings and make your changes.
Maximizing battery discharge time Battery discharge time varies depending on the features you use while on battery power. Maximum discharge time gradually shortens, as the battery storage capacity naturally degrades. Tips for maximizing battery discharge time: ● Decrease the brightness on the display. ● Store the Slate in a cool, dry location. ● Select the Power saver setting in Power Options.
Conserving battery power ● Tap the Power saver power plan through Power Options under System and Security in Windows Control Panel. ● Turn off wireless and local area network (LAN) connections and exit modem applications when you are not using them. ● Disconnect unused external devices that are not plugged into an external power source. ● Stop, disable, or remove any external media cards that you are not using. ● Decrease screen brightness.
3. 34 Plug the other end of the power cord into an AC outlet (3).
Docking the Slate to the HP Slate Dock To dock the Slate to the HP Slate Dock, follow these steps: 1. Align the docking connector on the dock base with the power connector on the bottom edge of the Slate, and then lower the Slate onto the dock. 2. Plug the AC adapter into the power connector on the back of the dock. 3. Plug the power cord into the AC adapter. 4. Plug the other end of the power cord into an AC outlet.
6 External cards and devices Using SD Card Reader cards Optional digital cards provide secure data storage and convenient data sharing. These cards are often used with digital media–equipped cameras and PDAs as well as with other devices.
Removing a digital card CAUTION: To prevent loss of information or an unresponsive system, use the following procedure to safely remove the digital card. NOTE: The SD Card Reader is located on the left edge of the Slate. 1. Save your information and close all programs associated with the digital card. 2. Tap the remove hardware icon in the notification area, at the far right of the taskbar, and then follow the on-screen instructions. 3.
▲ Connect the USB cable for the device to the USB port. You will hear a sound when the device has been detected. NOTE: The first time you connect a USB device, a message in the notification area lets you know that the device is recognized by the Slate. Removing a USB device CAUTION: To reduce the risk of damage to a USB connector, do not pull on the cable to remove the USB device. CAUTION: To prevent loss of information or an unresponsive system, use the following procedure to safely remove a USB device.
7 Drives Identifying installed drives To view the drives installed on the Slate, tap Start > Computer. Handling optional external hard drives Optional external hard rives are fragile computer components that must be handled with care. Refer to the following cautions before handling drives. Additional cautions are included with the procedures to which they apply.
Using optional external drives Removable external drives expand your options for storing and accessing information. USB drives include the following types: ● 1.
8 Security Protecting your Slate Standard security features provided by the Windows operating system and the non-Windows BIOS Setup can protect your personal settings and data from a variety of risks. Follow the procedures in this chapter to use the following features: ● Passwords ● Antivirus software (purchased separately) ● Firewall software ● Critical security updates NOTE: Security solutions are designed to act as deterrents.
Using passwords A password is a group of characters that you choose to secure your Slate's information. Several types of passwords can be set, depending on how you want to control access to your information. Passwords can be set in Windows or in the non-Windows BIOS Setup preinstalled on the Slate. CAUTION: To avoid being locked out of the Slate, record each password you set.
Using antivirus software When you use the Slate for e-mail or Internet access, you expose it to computer viruses that can disable the operating system, programs, or utilities or cause them to function abnormally. Antivirus software (purchased separately) can detect most viruses, destroy them, and in most cases, repair damage they have caused. To provide ongoing protection against newly discovered viruses, antivirus software must be kept up to date.
Using firewall software When you use the Slate for e-mail, network, or Internet access, unauthorized persons may be able to gain access to the Slate, your personal files, and information about you. Use the firewall software preinstalled on the Slate to protect your privacy. Firewall features include logging and reporting of network activity, and automatic monitoring of all incoming and outgoing traffic. Refer to the firewall user guide or contact your firewall manufacturer for more information.
Installing critical updates CAUTION: Microsoft sends alerts regarding critical updates. To protect the Slate from security breaches and computer viruses, install all critical updates from Microsoft as soon as you receive an alert. Updates to the operating system and other software may have become available after the Slate was shipped. To be sure that all available updates are installed on the Slate, observe these guidelines: ● Run Windows Update as soon as possible after you set up your Slate.
9 Updating software To update the software, follow these steps, which are explained in the remainder of this guide: 1. Identify your Slate's model, product category, and series or family. Prepare for a system BIOS update by identifying the BIOS version currently installed on the Slate. If your Slate is connected to a network, consult the network administrator before installing any software updates, especially system BIOS updates. NOTE: The Slate's system BIOS is stored on the system ROM.
Updating programs and drivers To download and install software other than a BIOS update, follow these steps: 1. Access the updates on the HP Web site at http://www.hp.com. 2. Follow the instructions on the screen to find the software you want to update. 3. At the download area, tap the software you want to download and follow the instructions on the screen. NOTE: Make a note of the path to the location on your hard drive where the software is to be downloaded.
10 BIOS Setup Starting BIOS Setup BIOS Setup is a ROM-based information and customization utility that can be used even when your Windows operating system is not working. The utility reports information about the Slate and provides settings for startup, security, and other preferences. To start BIOS Setup: NOTE: An external keyboard may be connected to the USB port to perform these steps. 1.
4. Press the Volume up button (+) or Volume down button (-) on the Slate or the arrow keys on an external keyboard to select a language, and then press the Home button on the Slate or enter on an external keyboard. 5. To save your changes and exit BIOS Setup, press the Ctrl+alt+del button on the top edge of the Slate, or use the arrow keys on an external keyboard to select Exit > Exit Saving Changes. Then press the Home button on the Slate or enter on an external keyboard.
When the Main menu is selected, system information is displayed. 4. To exit BIOS Setup without changing any settings, press the Ctrl+alt+del (Security) button on the top edge of the Slate or the arrow keys on an external keyboard to select Exit > Exit Discarding Changes. Then press the Home button on the Slate or the enter key on an external keyboard. Restoring factory settings in BIOS Setup The following procedure explains how to restore the BIOS Setup factory settings.
Updating the BIOS Updated versions of the software provided with your Slate may be available on the HP Web site. Most BIOS updates on the HP Web site are packaged in compressed files called SoftPaqs. Some download packages contain a file named Readme.txt, which contains information regarding installing and troubleshooting the file.
To download a BIOS update: 1. Access the updates on the HP Web site at http://www.hp.com. 2. Follow the on-screen instructions to identify your Slate and access the BIOS update you want to download. 3. At the download area, follow these steps: a. Identify the BIOS update that is later than the BIOS version currently installed on your Slate. Make a note of the date, name, or other identifier. You may need this information to locate the update later, after it has been downloaded to your hard drive. b.
Diagnostics menu Select To do this Primary Hard Disk Self Test Run a quick or comprehensive self-test on the hard drive. Memory Test Run a diagnostic test on the system memory. System Configuration menu Select To do this Language Change the display language for BIOS Setup. Virtualization Technology Enable or disable. HP recommends that this feature remain disabled unless specialized applications are being used.
Index A AC adapter connecting 33 identifying 17 airport security devices 39 antennas 16 audio functions, checking 26 audio-in (microphone) jack 12, 24 audio-out (headphone) jack 12, 24 B battery discharging 32 low battery levels 32 power 31 BIOS Setup Menu 52 BIOS, updating 51 Bluetooth device 19 boot options 53 boot order 53 buttons Ctrl+alt+del 14 Home 11, 14 Keyboard 14 volume 14, 15 Volume down 11 Volume up 11 C cables, USB 38 camera 27 camera, identifying 15, 16, 23 changing BIOS Setup language 48 che
L label tray identifying 12 opening 13 labels Microsoft Certificate of Authenticity 18 regulatory 18 serial number 17 landscape view 9 language 53 light, power 12 low battery level 32 R readable media 29 regulatory information, regulatory label 18 restoring default settings 50 rotating touch screen gesture 4 M Main menu 52 memory test 53 microphone (audio-in) jack 12, 24 microphone, identifying 14 multimedia components, identifying 23 N navigating in BIOS Setup network icon 19 49 O on-screen keyboard op
