(User Guide) Instruction Manual

For information on the minimum requirements to run HP SUM, see the HP Smart Update Manager
Release Notes on the HP website:
http://www.hp.com/go/hpsum/documentation
HP SUM supported firmware for HP ProLiant servers
SupportedComponent
YesSystem ROM
Yes, both server-based and directly to the iLO Management
NIC port
iLO firmware
YesBroadcom NIC firmware
YesIntel NIC firmware
Yes, onlineNetXen NIC firmware
YesQLogic NIC firmware
YesPowerPIC firmware
YesSmart Array controller firmware
Yes, some older SATA hard drives require offline modeSAS and SATA hard drive firmware behind HP Smart Array
controllers
NoSAS and SATA hard drive firmware behind non-Smart
Array controllers
YesEmulex, QLogic, and Brocade Fibre Channel HBA firmware
Yes, online onlyFC switch firmware
For more information on supported FC switches, see the
HP Smart Update Manager Release Notes, on the HP Smart
Update Manager Information Library at http://
www.hp.com/go/hpsum/documentation.
YesTape Blade firmware
Yes, online onlyOA firmware
Yes, online onlyVC firmware
YesCPLD firmware
YesHP StorageWorks MDS 600 enclosure firmware
NoMSA 2000 firmware (P2x00 firmware)
Yes, when attached through a Smart Array controllerD2600/D2700 firmware
Yes, online only3Gb/s and 6 Gb/s SAS BL switches
YesFCoE/CNAs
YesSES firmware
Deploying HP Integrity Smart Update Firmware bundles with HP SUM
You can use HP SUM to deploy components delivered with the HP Integrity Smart Update Firmware
bundles, or use HP SUM to pull updates from the web.
10 Introduction