Manualshelf

(User Guide) Instruction Manual

ManualsBrandsHP ManualsSoftwareSmart Update Manager
11121314151617181920
Deploying firmware to the HP Integrity servers is done remotely and is the same as deploying other
firmware, such as OA, with the following exceptions:
• Specify the IP address of the monarch (primary) OA on Suppertime 2 enclosures, or the
Monarch iLO 3 management processor on multi-blade servers.
• On the Select Components screen, click Configure Now, and then select whether you want to
Upload and Activate or Upload but Do Not Activate. The Upload and Activate option
automatically powers down and reboots the server after the update finishes, which activates
the firmware. If you select the Upload but Do Not Activate option, the system firmware will be
pending activation until the server is manually powered off. By default, HP SUM selects Upload
but Do Not Activate.
• Specify the IP address as the target to update I/O firmware updates on HP-UX servers. You
can only update remote HP-UX targets.
For more information on HP Integrity Smart Update Bundles, see the Manage HP Integrity Servers
Firmware Updates website at http://www.hp.com/go/smartupdate/integrity.
For information on the minimum requirements to run HP SUM, see the HP Smart Update Manager
Release Notes on the HP website:
http://www.hp.com/go/hpsum/documentation
HP SUM supported firmware for Integrity servers
SupportedComponent
YesSystem ROM firmware
YesFPGA firmware
YesiLO-3 MP firmware
YesPower Monitor firmware
YesSuperdome 2 Complex and nPartition firmware
YesOA firmware
YesVC firmware
Yes (Integrity servers running HP-UX)I/O Card firmware
Yes, online onlyFC switch firmware
For more information on supported FC switches, see the
HP Smart Update Manager Release Notes, on the HP Smart
Update Manager Information Library at http://
www.hp.com/go/hpsum/documentation.
Deployment modes
The following key terms apply when using HP SUM to deploy updates:
DefinitionTerm
The installation runs on the physical hardware you are
updating. For example, running a utility on a server to
update the server's system ROM.
Local
The installation runs on one system, but updates other
physical targets. For example, updating the OA or HP
Integrity server firmware across a network.
Remote
The installation occurs while the host processor is running
in the normal server environment. For example, if the server
Online
Deploying HP SUM 11