(User Guide) Instruction Manual

Results: All software components and firmware components from the update bundle,
cp008097.exe, and cp008257.exe were installed on Management Server1, Management
Server2, and Management Server3.
Return codes
HP SUM has consolidated return codes from Linux and Windows smart components into a new,
enhanced return-code mapping. These return codes determine the status of the component
installation. You can also use return codes in a script to control the execution of the script and
determine any required branching.
In Linux, the negative return codes are reported. These return codes are determined by subtracting
the negative value from 256.
TextWindowsVMware
ESXi 5.0
or later
LinuxValueReturn code
The installation was successful.0000SUCCESS_NO_REBOOT
The installation was successful,
but a reboot is required.
1111SUCCESS_REBOOT
The component was current or
not required.
3333SUCCESS_NOT_REQUIRED
A general failure occurred. For
details, see the error log.
255255255-1FAILURE_GENERAL
A bad input parameter was
encountered.
254254254-2FAILURE_BAD_PARM
The installation of the
component failed.
253253253-3FAILURE_COMPONENT_FAILED
Windows smart-component return codes
MeaningError level
The smart component was not installed. For more
information, see the log file.
0
The smart component was installed successfully.1
The smart component was installed successfully, but the
system must be restarted.
2
The installation was not attempted because the required
hardware is not present, the software is current, or there
is nothing to install.
3
Linux smart-component return codes
Single-target servers:
MeaningError level
The smart component was installed successfully.0
The smart component was installed successfully, but the
system must be restarted.
1
46 Using scripts to deploy updates