(User Guide) Instruction Manual

IPv6 addresses can be passed to HP SUM in command line arguments or using the HP SUM user
interface. In the HP SUM user interface, you can add a remote host on an IPv6 network by either
entering the DNS name of the IPv6 target server or by selecting the IPv6 address button and entering
the IPv6 address. HP SUM supports both the short-name and full IPv6 notation. You do not need
to add the optional interface number when you enter the address.
If you cannot connect to the target server or receive a Discovery failed message when executing
HP SUM in an IPv6 environment, see “Troubleshooting” (page 66).
After you connect to the target server, all other HP SUM functions work identically. Log files for
IPv6 hosts are stored with all other HP SUM files in the \CPQSYSTEM\hp\log\<ip_address>
directory.
Configuring IPv6 for Windows Server 2008
HP SUM provides the most robust support for remote deployment when using Windows Vista as
a client to Windows Server 2008-based servers. Using HP SUM in this environment enables you
to use all the capabilities of IPv6 including link-local, site-local, and global IP addresses for both
local and remote node servers. Windows Vista, when used as a client to run HP SUM to remote
Windows Server 2008 operating systems or as a node operating system on HP Workstation server
blades, provides the infrastructure that supports full IPv6 deployment of software and firmware
updates from HP SUM.
IPv6 addresses can be passed to HP SUM in command line arguments or using the HP SUM user
interface. In the HP SUM user interface, you can add a remote host on an IPv6 network by either
entering the DNS name of the IPv6 node server or by selecting the IPv6 address button and entering
the IPv6 address. HP SUM supports both the short-name and full IPv6 notation. You do not need
to add the optional interface number when you enter the address.
If you cannot connect to the node server or receive a Inventory failed message when executing HP
SUM in an IPv6 environment, see “Troubleshooting” (page 66).
After you connect to the node server, all other HP SUM functions work identically. Log files for IPv6
hosts are stored with all other HP SUM files in the \CPQSYSTEM\hp\log\<ip_address>
directory.
NOTE: Windows XP clients are not supported in IPv6 networks for HP SUM deployment.
Configuring IPv6 for Linux
HP SUM leverages the IPv6 capabilities of Linux as provided by the Red Hat Enterprise Linux and
Novell SUSE Linux Enterprise Server products. Using HP SUM in this environment enables you to
use all the capabilities of IPv6 including link-local, site-local, and global IP addresses for both local
and remote node servers. Remote node servers must have the iptables-ipv6 RPM installed before
targeting them from HP SUM. Failure to install the iptables-ipv6 RPM prevents HP SUM from opening
the communications port needed to send data to the initiating Linux workstation. You can disable
the Linux firewall to allow HP SUM to work, but the Linux server becomes vulnerable to attack.
For information on how to setup IPv6 in a Linux environment, please see the Linux IPv6 How To
website at Linux IPv6 How-To.
IPv6 addresses can be passed to HP SUM in command line arguments or using the HP SUM user
interface. In the HP SUM GUI, HP SUM automatically detects whether to use IPv4 or IPv6 on the
Add Node screen.
If you cannot connect to the node server or receive an inventory failed message when executing
HP SUM in an IPv6 environment, see “Troubleshooting” (page 66).
After you connect to the node server, all other HP SUM functions work identically. Log files for IPv6
hosts are stored with all other HP SUM files in the /var/hp/log/<ip_address> directories.
The only current limitation of HP SUM in a Linux IPv6 environment is that all remote node Linux-based
servers must have the iptables-ipv6 RPM file installed. You can find the file on the distribution media
Configuring IPv6 networks 63