(User Guide) User guide

Scripted deployment 45
Parameter Description Possible values
installation.
Do not use the /romonly parameter with the
/softwareonly
parameter.
SOFTWAREONLY
This parameter is a filter switch and allows the user
to view only the software components required for
installation.
Do not use the /softwareonly parameter with
the
/romonly
parameter.
YES, NO
USECURRENTCREDENTIAL
This parameter enables the credentials of the local
host to be used as the credentials to access the
targets instead of providing the username and
password explicitly for each target.
The assumption is that the current credentials are
valid for the targets being accessed. (Applies to
Windows® operating systems only.)
YES, NO
WEBUPDATENEEDED
This parameter enables you to instruct HP SUM to
include the components from the HP FTP site
(ftp://ftp.hp.com) in the list of possible updates.
YES, NO
USEPROXYSERVER
This parameter enables the inclusion of a proxy
server (and port number) to access the HP FTP site
(ftp://ftp.hp.com).
String value
For example,
11.22.33.44:80
USEPROXYSCRIPT
This parameter enables the inclusion of a proxy
script to access the HP FTP site (ftp://ftp.hp.com).
Web URL (for example,
autoproxy.com)
DELETEINPUTFILE
This parameter enables you to instruct HP SUM to
delete the input file after it has been read in.
YES, NO (default)
ONFAILEDDEPENDENCY
This parameter instructs HP SUM how to proceed
when a component has a failed dependency.
The default of OmitHost causes the host to be put
in a failure state and no install is attempted on it.
OmitComponent clears the affected components
and proceeds with any updates that do not have
dependency failures. Force attempts all updates,
even if they have dependency failures.
OmitHost (default),
OmitComponent, Force
HOST
This parameter is the IP address or the DNS name
of a remote server, remote iLO NIC port, Virtual
Connect Ethernet or Fibre Channel Module for
c-Class BladeSystem, or BladeSystem Onboard
Administrator.
When two Onboard Administrators are in an
enclosure, this parameter is the active Onboard
Administrator. When specifying the IP address, you
can use either the IPv4 or IPv6 format.
This parameter specifies an already defined group
name in the HP SUM GUI.
IP address, DNS name
UID
This parameter enables you to log in to the target
hosts with your user ID.
<username>
PWD
This parameter enables you to use the password for
the user ID specified in the UID.
The password is used to log in to target hosts.
<password>
LOGFILENAME = "path"
This argument enables you to redirect the output
from HP Smart Update Manager or the HP
BladeSystem c-Class Onboard Administrator flash
utility to a different directory than the default
Log file name