(User Guide) User guide

Scripted deployment 48
Parameter Description Possible values
subnets to use for its web servers.
The IP-BINDING parameter must be set to yes for
this parameter to be used during installation.
(Applies to Linux PSP only.)
(for example,
10.1.1.1/255.255.255.0
;10.2.2.2/255.255.255.
0)
IP-RESTRICTED-LOGINS
This parameter is used by the HP Systems
Management Homepage to restrict login access.
(Applies to Linux PSP only.)
YES, NO (default)
To enable restrictions on
who can log in to the web
server, this parameter must
be set to yes, and values
must be provided to the
IP-RESTRICTED-EXCLU
DE or
IP-RESTRICTED-INCLU
DE
parameters.
IP-RESTRICTED-EXCLUDE
This parameter is used by the HP Systems
Management Homepage to exclude specific IP
address/NetMask pairs from logging into the web
services. (Applies to Linux PSP only.)
This parameter is ignored unless the
IP-RESTRICTED-LOGINS parameter is set to
yes
.
List of IP address ranges
separated by semicolons
(for example,
10.1.1.1-10.1.1.10;10.2.
2.2-10.2.2.10)
IP-RESTRICTED-INCLUDE
This parameter is used by the HP Systems
Management Homepage to enable login only from
the IP address/NetMask pairs specified. (Applies
to Linux PSP only.)
This parameter is ignored unless the
IP-RESTRICTED-LOGINS parameter is set to
yes
.
List of IP address ranges
separated by semicolons
(for example,
10.1.1.1-10.1.1.10;10.2.
2.2-10.2.2.10)
LOCALACCESS-ENABLED
This parameter is used by the HP Systems
Management Homepage to determine whether to
enable local anonymous access to the web
services. (Applies to Linux PSP only.)
•
YES (default to include
anonymous access)
•
NO
LOCALACCESS-TYPE
This parameter is used by the HP Systems
Management Homepage to determine the type of
access granted to local users. (Applies to Linux PSP
only.)
•
Anonymous (default)
•
Administrator
CAUTION: Selecting local
access with administrator
privileges as the login
provides full access to any
user with access to the local
console, without prompting
for a user name or
password.
TRUSTMODE
This parameter is used by the HP Systems
Management Homepage to set up the trust
relationship mode. (Applies to Linux PSP only.)
•
TrustByCert—If this
value is used, the
CERTLIST parameter
must be defined to
enable access to the
server.
•
TrustByName—If this
value is used, the
XENAMELIST
parameter must be
defined.