Installation Manual

4. Once you are in the printer’s Embedded Web Server, select the Setup tab, then Firmware update.
5. If you have an HP Designjet T3500 Production eMFP, select the Manual firmware update tab.
6. Follow the instructions to upload the Print Controller license you just downloaded.
7. To check the licenses have been correctly installed, you can use the printer’s front panel to view general
information about the printer (see the printer user’s guide). It should tell you which HP Designjet
SmartStream licenses have been installed, if any. The printer’s Embedded Web Server also displays this
information, near the top of the window, just under the green header bar.
8. The printer is now ready for use with HP Designjet SmartStream.
How to install the HP SmartStream Preflight Manager for HP Designjet
1. Download the correct installer for your operating system (32- or 64-bit).
2. Start the installer, and follow the instructions on the screen.
3. When the installation has finished, start the application.
ENWW How to install 3