Installation Manual

HP Storage Essentials SRM 6.0 Installation Guide 145
5. Click Close to return to the Advanced page.
6. Paste the copied text into the Custom Properties box.
7. Change the value by entering cimom.snmpTrapListenerCommunityString=<value>
where <value> is the desired community string value.
8. Click Save.
Viewing or Changing the Community String in Command View EVA 6.x
To view or change the community string:
1. Open the c:\hsvmafiles\nsaserver.ini file in a text editor on the Command View EVA
server.
2. Find the line Authority=Public
This example shows the Command View EVA 6.x default: Public.
3. Change the value to the desired community string. For example, if you want to change the
community string to public, enter Authority=public
4. Restart the service for Command View EVA.
Viewing or Changing the Community String in Command View EVA 7.x
To view or change the community string:
1. Open the C:\Program Files\Hewlett-Packard\Sanworks\Element Manager for
StorageWorks HSV\config\cveva.cfg file in a text editor on the Command View EVA
server.
2. Find the following command lines:
# Authority. Default = Public
authority Public
3. Change the community string to the desired value. For example, if you want to change the
community string to public, enter authority public
4. Restart the service for Command View EVA.
Configuring event and host notification in Command View EVA
See the HP StorageWorks Command View EVA user guide for instructions on configuring
Command View EVA event notification. The Command View EVA documentation is available at
http://www.hp.com/support/manuals
.
Discovering HP StorageWorks XP Arrays
You can discover HP StorageWorks XP Arrays by using the following methods:
• Discovering HP XP Arrays by Using Command View XP and SMI-S, page 145
• Discovering HP XP Arrays by Using Command View XP Advanced Edition, page 146
• Discovering HP XP Arrays by using the built-in XP Provider, page 146