Installation Manual

HP Storage Essentials SRM 6.0 Installation Guide 199
• Maintenance level 03 or later - This is required for the HBA API. The operating system level can
be found by entering the following command at the command prompt:
oslevel -r
• bos.rte.libc.5.1.0.36 or later - This is required for Java 1.4 support. The file can be downloaded
from the IBM Technical Support Web site at the following URL:
https://techsupport.services.ibm.com
Both AIX 5.1 and 5.2
xlC.rte.5.0.2.1 or later - The C++ runtime. To obtain the C++ runtime, go to the IBM Technical
Support Web site at the following URL:
https://techsupport.services.ibm.com
AIX 5.3
• bos.rte.libc 5.3.0.0 - This is required for Java 1.4 support.
• xlC.rte 6.0.0.0 - The C++ runtime.
Go to the IBM Technical Support Web site at the following URL to obtain information about
obtaining these file:
https://techsupport.services.ibm.com
On the Web page do the following:
1. In the Refine Your Search Section, select Tools/Utilities from the Limit by Type menu.
2. Select AIX from the Limit by Platform or Operating System menu.
3. Select 5.0 from the Limit by Version menu.
4. In the Limit by Adding Search Terms box, enter the following:
Download the VisualAge C++ for AIX V5 Runtime libraries
5. Install the xlC.rte file set, not the .rte file for AIX 4.x.
Removing the CIM Extension from AIX
Make sure preview is set to No. Refer to your documentation for AIX for more information.
To remove the CIM extension for AIX:
1. Stop the CIM extension as described in ”Stopping the CIM Extension” on page 198.
2. Enter the following at the command prompt:
# smit -C
3. Select Software Installation and Maintenance.
4. Select Software Maintenance and Utilities.
5. Select Remove Installed Software.
6. In the SOFTWARE name, press Esc+4 and select:
APPQcime
7. On the same page you selected APPQcime, select No for Preview by pressing the Tab key.
8. Press Enter to remove the software.