Installation Manual
Installing the CIM Extension for OpenVMS250
IMPORTANT: The Emulex driver does not contain the required library that is required by HP
Storage Essentials. You must install Emulex HBAnywhere software so that HP Storage Essentials can
discover hosts configured with HBAnywhere and hbatest can detect the Emulex host bus adapter.
Prerequisites
The prerequisites are as follows:
Supported OpenVMS (Alpha) versions and required ECOs
NOTE: To verify installed patches, enter the following at the command prompt:
$ PRODUCT SHOW PRODUCT/FULL
• OpenVMS Alpha 7.3-2
The following patches must be installed in the order specified:
• DEC-AXPVMS-VMS732_PCSI-V0300 or later
• DEC-AXPVMS-VMS732_UPDATE-V0600 or later
• DEC-AXPVMS-VMS732_SYS-V1000 or later
• DEC-AXPVMS-VMS732_FIBRE_SCSI-V0900 or later
• OpenVMS Alpha 8.2
• DEC-AXPVMS-VMS82A_PCSI-V0100 or later
• DEC-AXPVMS-VMS82A_UPDATE-V0300 or later
• DEC-AXPVMS-VMS82A_SYS-V0400 or later
• DEC-AXPVMS-VMS82A_FIBRE_SCSI-V0200 or later
• OpenVMS Alpha 8.3 - The OpenVMS Alpha 8.3 comes with the required ECOs and patches.
Supported OpenVMS Itanium versions and required ECOs
• OpenVMS IA64 8.2-1
• HP-I64VMS-VMS821I_PCSI-V0100 or later
• HP-I64VMS-VMS821I_UPDATE-V0300 or later
• HP-I64VMS-VMS821I_SYS-V0200 or later
• HP-I64VMS-VMS821I_FIBRE_SCSI-V0200 or later
• OpenVMS IA64 operating systems - The OpenVMS IA64 operating system comes with the
required ECOs and patches.
Required Disk Space
The CIM extension for OpenVMS Alpha host requires 170 MB.
The CIM extension for OpenVMS IA64 host requires 400 MB.
Network Port Must Be Open