Installation Manual

Installing the CIM Extension for OpenVMS258
• CXWS_LOG.3 - contains logging information that was previously in cxws.log.2
The CXWS.OUT file contains some logging information, such as the CIM extension starting, which is
recorded in case something unexpected happens with the Java Virtual Machine. The CIM extension
appends the CXWS.OUT file and rolls it over.
The CXWS_NATIVE.LOG contains logging information relative to OpenVMS native operations. The
configuration information for CXWS_NATIVE.LOG is maintained in
SYS$SPECIFIC:[OPT.APPQCIME.CONF], where SYS$SPECIFIC:[OPT] is the directory in
which the node-specific files of the CIM extension are present. When the log file size exceeds the
LOG_SIZE parameter specified in the configuration file for the CXWS_NATIVE.LOG, the file rolls
over. The information in CXWS_NATIVE.LOG is moved to CXWS_NATIVE.LOG.OLD. If
CXWS_NATIVE.LOG.OLD already exists, it is deleted.
Increasing the Native Logging Level
The configuration information for CXWS_NATIVE.LOG is maintained in
SYS$SPECIFIC:[OPT.APPQCIME.CONFIG]CXWS_NATIVE.CFG. In order to increase the
logging level, specify the desired log level in this file.
For example, Set LOG_LEVEL to 3 in CXWS_NATIVE.CFG and restart the CIM extension to
increase the log level to 3.
Removing the CIM Extension from OpenVMS
This section includes information on removing the CIM extension. It covers the following topics:
• ”Uninstalling the OpenVMS CIM Extension on a Standalone Host” on page 258
• ”Uninstalling the OpenVMS CIM Extension on a Cluster Host” on page 259
Uninstalling the OpenVMS CIM Extension on a Standalone Host
To remove the CIM extension for OpenVMS on a standalone host:
1. Log in as system.
2. Enter the following at the command prompt:
$ @SYS$COMMON:[OPT.APPQCIME.SCRIPTS]APPIQ_LOCAL_UNINSTALL.COM
3. Press Enter to proceed with the uninstall, as shown in the example below:
CIM Extension is Stopped...
The following product has been selected:
HP AXPVMS APPQCIME V6.0 Layered Product
The following product will be removed from destination:
HP AXPVMS APPQCIME V6.0 DISK$VMS_7_3_2:[VMS$COMMON.]
Portion done:
0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
The following product has been removed:
HP AXPVMS APPQCIME V6.0 Layered Product