Installation Manual

Installing and Discovering the Windows Proxy292
4. Read the important notes. Then, click Next.
5. Check the pre-installation summary. You are shown the following:
•Product Name
• Installation Folder
• Disk Space Required
• Disk Space Available
6. Do one of the following:
•Click Install if you agree with the pre-installation summary.
•Click Previous if you want to modify your selections.
The Windows Proxy is installed.
7. When you have been told the installation has been successful, click Done to quit the installation.
IMPORTANT: Keep in mind that the Windows Proxy automatically starts when the system is
restarted. The management server can only obtain information from the Windows hosts
when the Windows Proxy (AppStorWinProxy service) is running.
8. If the Windows host running the Windows proxy has a private and a public network interface,
you must modify the winproxy.conf file.
9. Discover the Windows proxy as described in the topic, ”Discovering the Windows Proxy” on
page 292.
Discovering the Windows Proxy
IMPORTANT: Install the Windows proxy before you try the following steps.
Keep in mind the following:
• Install the Windows proxy before you try the following steps.
• The recommended workaround for entering an IP address into the discovery list as well as the
Windows Proxy list is to use IP address in one user interface and DNS name in the other.
To discover a Windows proxy:
1. Select Discovery > Setup on the management server.
2. Click the Windows Proxy tab.
3. Enter the following information for the Windows proxy: