Installation Manual

HP Storage Essentials SRM 6.0 Installation Guide 343
b. In the Available Hosts section, select the hosts to add to the Cluster Members table. If
desired, use the filter to assist in the selection of hosts. For details about the filtering
functionality, see ”Filtering Hosts” on page 343.
You may also use the Select Related Hosts button to facilitate the selection of hosts. Select a
host in the table, and click Select Related Hosts to automatically select any related hosts.
c. After you have selected the hosts that you would like to add to the cluster, click Add Selected
Hosts to Cluster. The selected hosts are added to the Cluster Members table.
d. Click Next.
4. Cluster Manager Step 3 (Specify Cluster Shared Resources) is displayed. Select Automatic or
Manual. If you select Automatic, click Display Cluster Shared Resources, and the table at the
bottom of the page is automatically populated.
If you select Manual discovery, follow these steps:
a. Enter a name in the Cluster Shared Resource Name box.
b. Select a resource type from the Resource Type menu. The menu includes the following
resource types:
• Logical Disk
• Disk Partition
• Volume Manager Volume
• Disk Drive
c. Select the relevant resource for each cluster host, and click Save Selections as Cluster Shared
Resource. The selections are added to the Cluster Shared Resources table.
d. Repeat steps a through c for each shared resource in the cluster.
e. Click Next.
5. Cluster Manager Step 4 (Select Preferred Hosts for Cluster Shared Resources) is displayed.
Select a preferred host for each of the cluster shared resources. Shared resource capacity data
will be collected from the specified node. Selecting “None” will result in no information being
collected about the cluster shared resource.
Specify the preferred host for individual cluster shared resources. If a resource is not shared by
the preferred host selection, the preferred host menu for that shared resource will continue to
display the previous selection.
When you have finished specifying preferred hosts, click Finish.
Filtering Hosts
The Available Hosts table on Cluster Manager Step 2 (Specify Cluster Properties and Cluster
Members) allows you to filter the list of hosts displayed. To filter the list of hosts:
1. Click the + Filter link to display the filtering options.
If the volume filter is already displayed, the - Filter link is shown instead, which will collapse the
filtering options.
2. Enter all or part of a volume name in the Name Contains box.