Installation Manual

Installing the Management Server on Microsoft Windows46
• The server must be running a supported operating system or the upgrade will fail. Refer to
the support matrix for a valid operating system.
• Microsoft Internet Explorer 6.0 SP1 or later must be installed or the upgrade will fail.
• TCP/IP must be installed or the upgrade will fail.
• *The upgrade will fail if SNMP and the SNMP trap service is not installed and enabled. The
upgrade program tells you SNMP must be enabled and SNMP trap services must be
installed. The upgrade will not go beyond a certain point until you enable SNMP and
SNMP trap services.
• If insufficient disk space in %Temp% is detected the upgrade will fail. You must have at least
2 GB of free disk space on the drive where %temp% is located.
4. Read the overview information on the Getting Started with an Upgrade screen and click Next.
The Upgrade Locations screen is displayed showing the directories in which the management
server components are currently installed.
5. Optional. Select the check box to copy your CIM extensions to the management server only if
you want to overwrite the existing CIM extension files. You can copy the CIM extensions from
the CIM Extension CD manually to the management server at a later time. Note that this option
only copies the CIM extension files to the management server. It does not install the CIM
extensions on your hosts.
IMPORTANT: The 6.0 CIM extensions are required on any backup manager hosts to
continue collecting backup manager discovery data. Build 5.1 CIM extensions on backup
manager hosts are not supported after upgrading. See ”Deploying and Managing CIM
Extensions” on page 181 for information on installing CIM extensions.
6. Optional. You can change the location of the Oracle database.
7. Click Next to continue. The Verify System Requirements screen is displayed. See the support
matrix for complete system requirement details.
NOTE: The Port Availability requirement line may show a warning during an upgrade that
can be ignored, as it indicates that the existing management server service has reserved the
ports.
8. Click Next. The HP Systems Insight Manager Service Account Credentials screen is displayed.
Enter the password for the HP Systems Insight Manager. The user name and domain boxes are
pre-filled based on the information entered in the Upgrade Locations screen earlier.
9. Click Next. The Upgrade Summary screen is displayed showing the selected components to be
upgraded.
10.Click Upgrade to continue or Previous to make changes to the previous screen or Cancel if you
need to make changes to the server. Once you click Upgrade, the upgrade wizard begins
migrating the Oracle database and will not allow you to cancel until the migration is complete.
The automated Oracle database migration creates a backup of your Oracle 9i database,
exports the database, installs Oracle 10g Standard Edition, and imports the database during
the upgrade. You can cancel the upgrade once the database migration is complete if desired.