Installation Manual

HP Storage Essentials SRM 6.0 Installation Guide 113
e. In the WBEM settings section, select Update values for this protocol and Use values specified
below.
f. Enter the user name and password for the HP Storage Essentials management server (the
administrator account) in the format domain\administrator or
servername\administrator.
9. Select Options > Discovery.
10.Select the discovery task you created in step 2, and then click Run Now.
11.When the discovery task is complete, click the Run SE Discovery Data Collection Now link in the
For Storage Essentials (SE) discoveries section above the list of tasks.
12.Click Get Details to run discovery data collection and complete the discovery process for the HP
Storage Essentials management server.
Discovering Elements
HP recommends a phased discovery process in which you create separate tasks for groups of
elements. Discover your elements in the following order:
1. Switches and switch proxies (for more information, see ”Discovering Switches” on page 115).
2. Storage systems (for more information, see ”Discovering Storage Systems” on page 133).
3. NAS devices and tape libraries (for more information, see ”Discovering NAS Devices and Tape
Libraries” on page 149).
4. Applications, backup servers and hosts are discovered later after you install the CIM extensions
(for more information, see ”Deploying and Managing CIM Extensions” on page 181 and
”Discovering Applications, Backup Hosts and Hosts” on page 297).
Use the following procedure for each discovery task:
1. Decide if you will use global or system credentials for the discovery task. For tips on how to
choose the credential type that best suits your environment see ”Choosing Between System and
Global Credentials” on page 108.
2. If you decide to use global credentials, enter them now:
NOTE: System credentials are entered later in this procedure.
a. Select Options > Protocol Settings > Global Protocol Settings.
b. Enter the settings required to discover the element. For details on the information to enter,
see the section in this chapter for the specific element. For example, see ”Discovering
Brocade Switches” on page 116 for the required Brocade switch information.
c. Click OK to save the settings.