Installation Manual

Discovering Switches, Storage Systems, NAS Devices, and Tape Libraries116
the Discovery process. For more information on switch support, see the support matrix in the
Documentation Center (Help > Documentation Center in HP Storage Essentials).
IMPORTANT: All SMI-S switches require a user name and password.
Discovering Brocade Switches
The management server uses the Brocade SMI-S Provider (also known as the Brocade SMI Agent)
to discover Brocade switches. Before you can discover Brocade switches with SMI-S, however, you
must download and install the Brocade SMI Agent software. See the HP StorageWorks B-Series
document for instructions at: http://www.hp.com/go/hpsim/providers
. Check this web site
Table 4 Overview of Switch Discovery Requirements
Element Discovery Requirements For More Information
Brocade switches
(SMI-S)
IP address and the user name and
password from the Brocade SMI
Agent security setup.
See Discovering Brocade
Switches, page 116.
CNT switches IP address and the port number for
the InVsn Software that manages
the switch and the user name and
password.
See Discovering CNT Switches,
page 120.
Cisco switches
(SMI-S)
IP address of the Cisco switch and
the user name and password of the
switch.
See Discovering Cisco Switches,
page 121.
Cisco switches
(SNMP)
IP address of the Cisco switch.
Enter the SNMP read-only
community string as the user name
and enter the password.
See Discovering Cisco Switches,
page 121.
QLogic, and HP
M-Series switches
(SMI-S)
IP address of the SMI-S switch and
the user name and password of the
switch.
See Discovering Sun StorEdge,
QLogic and HP StorageWorks
M-Series for p-Class
BladeSystems, page 123.
Sun StorEdge,
QLogic, and HP
M-Series switches
(SNMP)
IP address of the Sun StorEdge,
QLogic, or HP M-Series switch.
Enter the SNMP read-only
community string as the user name
and enter the password.
See Discovering Sun StorEdge,
QLogic and HP StorageWorks
M-Series for p-Class
BladeSystems, page 123.
McDATA and EMC
Connectrix switches
Additional steps required for
discovering these switches vary
according to the network
configuration.
See Discovering McDATA and
EMC Connectrix Switches,
page 124.