Installation Manual

Discovering Switches, Storage Systems, NAS Devices, and Tape Libraries134
7. Click Save.
Discovering Storage Systems
Use the workflow in ”Discovering Elements” on page 113 to discover storage systems. This section
provides information about supported storage systems, including the information to enter in HP SIM
during the discovery process. For more information on device support, see the support matrix. The
support matrix is accessible from the Documentation Center (Help > Documentation Center in HP
Storage Essentials).
Table 6 Discovery Requirements for Storage Systems
Element Discovery Requirements For Additional Information
3PAR storage
systems
Discover the 3PAR storage system
directly.
See Discovering 3PAR Storage
Systems, page 135.
EMC CLARiiON
storage systems
The EMC Navisphere CLI is
required for the management
server to communicate with the
CLARiiON storage system.
See Discovering EMC CLARiiON
Storage Systems, page 138.
EMC Symmetrix
storage system
(Including EMC
Symmetrix DMX
storage systems)
Discover the server running the
EMC Solutions Enabler.
See Discovering EMC Solutions
Enabler, page 135.
LSI storage systems Can be discovered two ways:
• Entering the IP address/DNS
name, user name and
password of a controller for an
LSI storage system. Discovers
only the corresponding IP
address of the controller.
• Entering the IP address/DNS
name, user name and
password of a proxy that is
used to manage an LSI storage
system. Discovers all controllers
known to the proxy.
See Discovering LSI Storage
Systems, page 139.
HDS storage
systems
Discover the server running
HiCommand Device Manager.
See Discovering HDS Storage
Systems, page 139.
HP Modular Smart
Array (MSA)
storage systems
Discover the server running the
MSA SMI-S provider.
See Discovering HP
StorageWorks MSA Arrays,
page 142.