Installation Manual

HP Storage Essentials SRM 6.0 Installation Guide 201
8 Installing the CIM Extension for SGI ProPack for Linux
HP Storage Essentials Standard Edition does not support SGI ProPack for Linux hosts. See the HP
Storage Essentials Standard Edition Support Matrix for a list of supported devices. The support
matrix is accessible from the Documentation Center (Help > Documentation Center in Storage
Essentials).
This chapter contains the following topics:
• About the CIM Extension for SGI ProPack for Linux, page 201
• Prerequisites, page 202
• Verifying SNIA HBA API Support, page 202
• Installing the CIM Extension, page 203
• Starting the CIM Extension Manually, page 204
• How to Determine if the CIM Extension Is Running, page 205
• Configuring CIM Extensions, page 205
• Stopping the CIM Extension, page 208
• Rolling Over the Log Files, page 208
• Removing the CIM Extension from SGI ProPack for Linux, page 208
NOTE: This chapter describes how to install and manage the CIM Extension directly on the host.
You can also install and manage CIM Extensions remotely. See ”Deploying and Managing CIM
Extensions” on page 181.
IMPORTANT: Make sure you have reviewed Table 2 on page 2 to ensure you are at the correct
step.
About the CIM Extension for SGI ProPack for Linux
The CIM Extension for SGI ProPack for Linux gathers information from the operating system and
host bus adapters on an Altix host. It then makes the information available to the management
server.
IMPORTANT: Install the CIM Extension on each host you want the management server to manage.
The CIM Extension communicates with an HBA by using the Host Bus Adapter Application
Programming Interface (HBAAPI) created by the Storage Network Industry Association (SNIA). The
management server only supports communication with HBAs that are compliant with the HBA API.
For more information about the HBA API, see the following Web page at the SNIA Web Site:
http://www.snia.org/tech_activities/hba_api/