Installation Manual

HP Storage Essentials SRM 6.0 Installation Guide 205
The following is displayed:
./start
The CIM extension is ready to be contacted by the management server when it displays a
message resembling the following:
Thu Jan 21 14:46:47 EDT xxxx
CXWS x.x.x.x on /192.168.1.5 now accepting connections
where
.. xxxx is the year.
.. x.x.x.x is the version of CIM Extension
.. 192.168.1.5 is the IP address of the host
A similar message is now displayed in the cxws.out file when the CIM extension has
completed startup.
STATUS | wrapper | 2006/07/10 15:44:26 | --> Wrapper Started as Daemon
STATUS | wrapper | 2006/07/10 15:44:26 | Launching a JVM...
INFO | jvm 1 | 2006/07/10 15:44:27 | Wrapper (Version 3.1.2)
http://wrapper.tanukisoftware.org
INFO | jvm 1 | 2006/07/10 15:44:27 |
INFO | jvm 1 | 2006/07/10 15:45:55 |
INFO | jvm 1 | 2006/07/10 15:45:55 | Mon Jul 10 15:45:55 EDT 2006
INFO | jvm 1 | 2006/07/10 15:45:55 | CXWS 5.1.0.169 on
/16.118.238.196:4673 now accepting connections
Keep in mind the following:
• Depending on your terminal type and processor speed, the message, CXWS x.x.x.x on
/192.168.1.5 now accepting connections, may not display all the network interface
IPs on the host. Use the /opt/APPQcime/tools/cxws.out file to view the output from the
CIM extension.
• When you start the CIM extension, you can restrict the user accounts that can discover the host.
You can also change the port number the CIM extension uses. See the following topics for more
information. You can also access information about these topics by typing the following:
./start -help
How to Determine if the CIM Extension Is Running
You can determine if the CIM extension is running by entering the following command at the
command prompt:
# ./status
The CIM extension is running when a message resembling the following is displayed:
CIM Extension Running
Configuring CIM Extensions
Configuration information is stored in a configuration text file that is read by the CIM extension on
start-up. The file is named cim.extension.parameters and is located in the
[Installation_Directory]/conf directory on the host. This directory also contains a file
named cim.extension.parameters-sample. This file contains samples of available