Installation Manual

HP Storage Essentials SRM 6.0 Installation Guide 217
Removing the CIM Extension from HP-UX
To remove the CIM extension for HP-UX as root:
1. Login as root.
2. Stop the CIM extension, as described in ”Stopping the CIM Extension” on page 216.
3. Make sure you are not in the APPQcime directory. As a precaution, go to the root directory.
4. Enter the following at the command prompt:
# swremove APPQcime
When you see the following message, the CIM extension has been removed:
* Beginning Execution
* The execution phase succeeded for hpuxqaX.dnsxxx.com:/".
* Execution succeeded..
5. To remove the APPQcime directory, enter the following at the command prompt:
# rm -r APPQcime