Installation Manual

HP Storage Essentials SRM 6.0 Installation Guide 419
Solaris host VxVM If you discover a host with any typical SAN disk groups off
line, the storage volume page shows SAN mount points as
local instead of external. These disks, however, are not
accessible.
When you perform Discovery Data Collection with all disk
groups online, disks on the SAN are shown as external. Hosts
connected directly to a storage system are shown as local,
except for hosts connected by fibre. Hosts connected directly
to a storage system through fiber are shown as external.
Windows host VxVM When a Windows host with VxVM is used, the SCSI bus
number is always reported to be 1 in the SCSI bus column of
the Disk Drives page.
Any host NA The Unmounted Volume box under Capacity Summary
automatically displays 0 MB if you discovered the host but not
the storage system connected to it. This may occur if you did
not enter the IP address of the storage system when
performing discovery, or if your license does not allow you to
discover a particular storage system. See the support matrix
for Standard or Enterprise Edition to determine which storage
systems you can discover. The List of Features is accessible
from the Documentation Center (Help > Documentation Center
in Storage Essentials).
Table 31 Known Device Issues (continued)
Device Software Description