Installation Manual

HP Storage Essentials SRM 6.0 Installation Guide 23
• 8009
• 8083
• 8093
If you see a warning in the Ports Availability requirement you need to check to be sure that the
ports listed are not currently in use and make any changes that are necessary. Be aware that
the installation will continue even if a required port is not available.
NOTE: During upgrades, the Port Availability check may falsely indicate that the port for
the management server is currently in use. When you check the port, you see that it is
reserved by the management server and you can therefore safely ignore the warning.
11.Click Next and the Storage Essentials installation wizard proceeds to its HP Systems Insight
Manager Service Account Credentials screen. The fully qualified domain name or the IP
Address that you entered in the Installation Options screen for the designated server on which
HP SIM is installed is automatically displayed in the HP SIM Server box.
12.Enter the following on the HP Systems Insight Manager Service Account Credentials screen and
click Next:
• The user account name of the HP SIM server that you installed in ”Step 2 – (Required for
Separate Server Installations Only) Manually Install HP Systems Insight Manager” on
page 17.
• The password for the HP SIM server and also verify the password.
• The Domain name of the domain on which the HP SIM server resides.
The Installation Summary screen is displayed.
13.Verify the components that will be installed, use the Previous button to make any changes and
click Install when you are ready to install Storage Essentials and the other required software
components listed on the screen. The Storage Essentials installation wizard automatically
installs the components on the Storage Essentials server starting with the Oracle 10g Standard
Edition database.
IMPORTANT: If you decide to cancel the Storage Essentials installation before it has
finished, the installation wizard must first complete the installation of the current component
and will prompt you to click Yes to cancel the installation or No to continue the installation
after the current component installation is finished. If you cancel and then resume the
installation at a later time, the installation wizard will continue the installation from where it
stopped when you cancelled.
14.The Storage Essentials installation wizard prompts you to verify that the remote HP SIM server
you installed previously in Step – 2 is running when the Storage Essentials installation wizard
finishes installing the Oracle component. Do not click OK until you have verified that the remote
HP SIM server is running.