Installation Manual

HP Storage Essentials SRM 6.0 Installation Guide 31
• Operating System — Windows 2003 Server SP1, SP2, R2, R2 SP2. The Storage Essentials
installation or upgrade will not continue if the operating system requirement is not met.
• Processor — A dual Intel XEON (or AMD equivalent) 3.4 GHz or higher CPU is required. If
the CPU is close to the requirement, the installation wizard continues.
• DNS Resolution — The installation wizard verifies the IP Address and DNS name of the
server using nslookup. If nslookup is not successful, the installation will still continue.
IMPORTANT: DNS Resolution failure will prevent the product from running successfully.
See the following topic in the troubleshooting chapter if the DNS Resolution requirement
fails: “Reverse Lookup Failed” Message (Windows only), page 382.
• Port Availability — The management server requires the following ports to be available:
•80
•162
•443
• 1098–1120
• 4444
• 4445
• 4763
• 5962–5988
• 8009
• 8083
• 8093
If you see a warning in the Ports Availability requirement you need to check to be sure that the
ports listed are not currently in use and make any changes that are necessary. Be aware that
the installation will continue even if a required port is not available.
NOTE: During upgrades, the Port Availability check may falsely indicate that the port for
the management server is currently in use. When you check the port, you see that it is
reserved by the management server and you can therefore safely ignore the warning.
9. Click Install after reviewing the components that will be installed. Click Previous if you need to
make any changes before installing the management server files. Once you click the Install
button, the Oracle installation for the management server begins and the Command Prompt
window is displayed showing the status of the Oracle installation. The management server
installation wizard Status screen is displayed in the background.