Installation Manual

Installing the Management Server on Microsoft Windows48
Step 8 – Enable RMAN Backup if Desired
RMAN Backup is disabled by default as part of the upgrade process. When you log into the
management server after upgrading, you see a message informing you that RMAN Backup is
disabled. You should re-enable RMAN backup as soon as possible to continue backing up your
data.
Step 9 – Upgrade is Required on the Following
CIM Extensions
Upgrade CIM extensions on servers with the following functionality:
• Backup Manager Hosts — Backup information is not gathered from legacy CIM extensions. In
order for backup information to be gathered by the management server, the CIM extensions on
the Backup Manager Hosts must be at the same build number as the management server.
When you upgrade your management server, upgrade the CIM extensions on your Backup
Manager Host in order to continue to see backup data.
• Windows hosts using SecurePath — SecurePath information is not retrieved from legacy CIM
extensions.
• *Host that you want to retrieve cluster information for example: Veritas Cluster Server on Solaris
cluster and Microsoft Cluster Server
• *Linux hosts that support QLogic failover
*This is new functionality that requires Build 6.0 of the CIM extension.
Step 10 – Rediscover all Elements
You should rediscover all elements after you do an upgrade by running /Discovery Data
Collection.
Discovery is important because:
• Better scalability is provided after discovery.
• Cluster functionality. To use the new functionality, upgrade the CIM extensions to Build 6.0 and
rediscovery is required.
• You will see the following issues until you do Discovery:
• Reports and Capacity Manager/Capacity Explorer show incorrect raw capacity data for
storage systems.
• There is no trunked status indication on Brocade fabrics.
• No NPIV status indication.
• No provisioning for HP StorageWorks EVA arrays using Command View EVA.
• New host modes on storage systems are not available.
• Backup data collection would be suspended until CIM extensions on Backup Manager Hosts
are upgraded to Build 6.0 and they are rediscovered.
Steps That Can be Run Anytime After the Upgrade
The following steps can be completed any time after the upgrade; however, you will have reduced
functionality with the product until you complete these steps.