User's Manual

hp StorageWorks File System Extender User Guide 185
Post-restore steps
After the restore is finished, perform the following steps on each FSE implementation host that has been
restored starting with external FSE clients and finishing with the FSE server:
1. Stop the FSE processes that have been running to allow the restore process:
2. Start all FSE processes:
3. This step is required only on Windows FSE clients.
Windows specific
If you are operating on a Windows FSE client, detach the HSM FS filter from all disk volumes that store
HSM file systems. For each such volume, run the following command:
Run the consistency check of the File System Catalog (FSC) against the corresponding HSM file system to
verify the consistency of the data. For details, see ”Consistency check of FSC vs. HSM file system” on
page 141.
2005/12/16 11:28:58 fse_host.company.com Reading HSMFS of partition strato2...
2005/12/16 11:29:57 fse_host.company.com Setting extended attributes...
2005/12/16 11:29:57 fse_host.company.com Unmounting partition filesystem...
2005/12/16 11:29:59 fse_host.company.com Reading HSM DB of partition strato2...
2005/12/16 11:29:59 fse_host.company.com Restore complete for partition strato2
on client fse_host.company.com.
2005/12/16 11:29:59 fse_host.company.com Reading FSC of partition strato2...
2005/12/16 11:29:59 fse_host.company.com Attempting restore of client
fse_host.company.com
2005/12/16 11:29:59 fse_host.company.com Got these cmdline arguments:
/opt/fse/lbin/fse-restore.py --restore-fseclient strato3 vgraid5/lvstrato3 ext3
fse_host.company.com /dev/sg5 4
2005/12/16 11:29:59 fse_host.company.com Restoring partition strato3 on client
fse_host.company.com...
2005/12/16 11:29:59 fse_host.company.com Mounting vgraid5/lvstrato3...
2005/12/16 11:29:59 fse_host.company.com Mounted.
2005/12/16 11:29:59 fse_host.company.com Reading HSMFS of partition strato3...
2005/12/16 11:31:13 fse_host.company.com Setting extended attributes...
2005/12/16 11:31:15 fse_host.company.com Unmounting partition filesystem...
2005/12/16 11:31:16 fse_host.company.com Reading HSM DB of partition strato3...
2005/12/16 11:31:16 fse_host.company.com Restore complete for partition strato3
on client fse_host.company.com.
2005/12/16 11:31:16 fse_host.company.com Reading FSC of partition strato3...
2005/12/16 11:31:16 fse_host.company.com Reading RMDB...
2005/12/16 11:31:16 fse_host.company.com Reading CfgDB, FRI...
2005/12/16 11:31:17 fse_host.company.com Reading etc...
2005/12/16 11:31:17 fse_host.company.com Recreating RMDB from rmdb.bckp...
2005/12/16 11:31:23 fse_host.company.com Restore complete.
fse --stop
fse --start
C:\>fse --dismount-ntfs VolumeName