User's Manual

62 Configuring FSE
NOTE: If the Library Agent is running, the device for the library used by the agent is not seen in
the list.
TIP: You can also check the /proc/scsi/scsi file for a list of available SCSI devices.
Windows specific
** /dev/sg7 id:0:0:10:3
SCSI device ID: port 0, ch 0, id 10, lun 3, type Storage Array 12
Device: HP NS E1200-160 5678 ser #:P088LB std :4
Done!
C:\Program Files\Hewlett-Packard\FSE\bin>fse_scsi --scan
** \\.\Scsi2: id:2:0:1:0
SCSI device ID: port 2, ch 0, id 1, lun 0, type Medium Changer 8
Device: COMPAQ MSL5000 Series 0507 ser #: N/A std : N/A
** \\.\Scsi2: id:2:0:1:1
SCSI device ID: port 2, ch 0, id 1, lun 1, type Tape 1
Device: HP Ultrium 3-SCSI G24W ser #: N/A std : N/A
** \\.\Scsi2: id:2:0:1:2
SCSI device ID: port 2, ch 0, id 1, lun 2, type Tape 1
Device: HP Ultrium 3-SCSI G24W ser #: N/A std : N/A
** \\.\Scsi2: id:2:0:1:3
SCSI device ID: port 2, ch 0, id 1, lun 3, type Storage Array 12
Device: HP NS E1200-160 5669 ser #: N/A std : N/A
Done!