User's Manual
hp StorageWorks File System Extender User Guide 85
• the system volume size.
You can specify most of these attributes in the media pool configuration file.
If you use the --detail option, fsepool formats the output in a different way, and displays additional
FSE media pool attributes, as follows:
• the UUID of the pool,
• the UUID of the owning partition,
• the media pool’s RMDB entry key.
These attributes are assigned automatically by FSE during the FSE media pool (or FSE partition)
configuration.
Excerpt from the fsepool --list output
Excerpt from the fsepool --list --detail output
Checking the status of a particular media pool
To check the current status of a particular media pool, you must determine the FSE partition to which the
media pool belongs. Run the following command:
Pool Family Type Partition BlkSize[KB] #Vol VSize[MB] SysVol SysVol[MB]
my_LTO LTO Regular partLTO 128 1 n/a None n/a
my_Disk DISK Regular partLTO 64 1 100 None n/a
Pool: my_LTO
UUID: c8898640-8f8a-44aa-a6fd-47687ac1f791
Family: LTO
Type: Regular
Partition: partLTO
PartUUID:
BlkSize[KB]: 128
#Vol: 1
VSize[MB]: n/a
SysVol: None
SysVol[MB]: n/a
Key: 1
Pool: my_Disk
UUID: f264a661-1076-41dc-baab-bae7aed9e15b
Family: DISK
Type: Regular
Partition: partLTO
PartUUID:
BlkSize[KB]: 128
#Vol: 1
VSize[MB]: 100
SysVol: None
SysVol[MB]: n/a
Key: 2
fsepool --list [--detail]