Command Reference Guide

2.8 NAME 50

2. Family ... library family (AIT, LTO),

3. Type ... library type,

4. Host ... fully–qualiﬁed domain name (FQDN) of the host the library

is attached to,

5. CtrlDev ... library control device ﬁle,

6. Status ... current library status (online, disabled).

• –D, – –detail

Retrieve additional FSE library information and display the retrieved data

in the ParameterName: ParameterValue format with each parameter in its

own line. The following additional information is reported:

1. ProductID ... ID string of the library model,

2. SerialNo ... serial number of the library,

3. VendorID ... ID string of the library manufacturer,

4. FirmwareRev ... revision of the ﬁrmware the library currently uses,

5. LoadNr ... number of drive loads performed since the library was con-

ﬁgured in the FSE system,

6. UnloadNr ... number of drive unloads performed since the library was

conﬁgured in the FSE system,

7. Key ... internal RMDB key value assigned to the library.

This option may only be used together with the – –list option.

• –i, – –show–inventory

List names and status information for conﬁgured FSE drives in the FSE li-

brary LibraryName and indexes and status information for conﬁgured FSE

slots in the same library. Reported status information for an FSE drive in-

cludes:

1. Name ... drive name,

2. Type ... item type (drive),

3. Status ... current drive status (online, in use, disabled, error),

4. Medium ... barcode of the FSE medium that is loaded in the drive

(<empty> string is displayed if the drive is empty).

File System Extender 3.2 Command Line Reference