Command Reference Guide

2.9 NAME 58

4. medium volume size,

5. current amount of volume free space,

6. percentage of currently occupied volume space,

7. current medium volume status (empty, open, full, recovery, scanned,

in reorg, recycled, error).

• –V, – –volume

There are four kinds of usage of this option in combination with other op-

tions:

– if the ––list option is speciﬁed, show status of all medium volumes

on the medium with the Barcode barcode, or status of the medium

volumes on all media conﬁgured in the FSE system (if Barcode is

omitted);

– if the – –init option is speciﬁed, initialize only medium volume(s)

VolumeNumber... (the medium has to be already formatted);

– if the – –recreate–fri option is speciﬁed, populate system volume on

the medium with Fast Recovery Information from this volume (if it is

closed);

– if the – –reorg option is speciﬁed, reorganize only medium volume(s)

with consecutive number(s) VolumeNumber....

• –D, – –detail

Retrieve additional FSE medium or FSE medium volume information and

display the retrieved data in the ParameterName: ParameterValue format

with each parameter in its own line.

If this option is used with the – –list option, the following additional infor-

mation is reported:

– LibName ... name of the library the medium is located in,

– SlotAddr ... address of the library slot assigned to the medium,

– SlotType ... type of the library slot assigned to the medium,

– DrvName ... name of the drive the medium is loaded into (if any),

– SerialNo ... medium serial number,

File System Extender 3.2 Command Line Reference