Command Reference Guide

2.9 NAME 61

• VolumeNumber...

A non–negative integer value or a sequence of such values which repre-

sent(s) the position(s) of FSE medium volume(s) on the medium layout.

• – –mark–unreliable

Disallow writing to the FSE medium with barcode Barcode. From that

moment on, the data on the medium can only be read. This is done by

setting the status of this medium in the Resource Management Database

to UNRELIABLE. Note that unless additional option – –force is speciﬁed,

the command demands FSE administrator’s conﬁrmation before performing

this operation. Default answer to the conﬁrmation question is "No"

• – –mark–unusable

Disallow reading from and writing to the FSE medium with barcode Bar-

code. From that moment on, the data on the medium can be neither read nor

medium can be written to. This is done by setting the status of this medium

in the Resource Management Database to UNUSABLE. Note that unless

additional option – –force is speciﬁed, the command demands FSE admin-

istrator’s conﬁrmation before performing this operation. Default answer to

the conﬁrmation question is "No"

• – –mark–good

Make the FSE medium with barcode Barcode fully operational for normal

usage. From this moment on, the data on the medium can be read and

the medium can be written to. This is done by setting the status of this

medium in the Resource Management Database to GOOD. Note that unless

additional option – –force is speciﬁed, the command demands FSE admin-

istrator’s conﬁrmation before performing this operation. Default answer to

the conﬁrmation question is "No"

• – –close–volume

Mark speciﬁed FSE medium volume as full and set its status in the Re-

source Management Database accordingly. This operation also saves Fast

Recovery Information (FRI) to the end part of the medium volume and to

the medium’s system volume, if it is present. If writing FRI to medium fails

an appropriate warning is displayed.

File System Extender 3.2 Command Line Reference