Instruction Manual

DescriptionColumn name
The capacity of the LUN in bytesLUNSize
Use heuristic based on StorageSetting qualifier to determine the
RAID level
RAIDLevel
The name of the storage pool from which this LUN was carvedStoragePool
Snapshot IDSnapshotID
R_StorageDeviceCapacity
DescriptionColumn name
System keyDeviceKey
Name of storage systemDeviceName
Unique ID of storage systemID
Total capacity of a storage array in bytesrawcapacity
Space that is not yet assigned to a storage pool for configuration
into storage volumes (LUNs)
unassigned
Space that is not configured for a specific purposeotherRaw
Space that is assigned to pools of storage that can be configured
into storage volumes (LUNs)
assigned
Assigned space that is reserved for RAID overheadraidovrassigned
Assigned space that is not configured as LUNs or reserved for
RAID overhead
unallocated
Any assigned space that is not in the RAID Overhead,
Un-Allocated, or Allocated categories
otherassigned
The amount of space used in creating LUNs (If LUN is mirrored,
this is the total space used by the LUN and not the space usable
by the initiator.)
carved
Allocated space (space configured as storage volumes) that is
reserved for RAID overhead
overhead
The amount of usable bytes that have been assigned to portspresented
The number of usable bytes that have been carved into LUNs but
are not assigned to a port
unpresented
The amount of allocated space minus space that is reserved for
RAID overhead
usable
Snapshot IDsnapshotId
R_Process
DescriptionColumn name
System keyDeviceKey
Name of the systemDeviceName
IDID
Name of the processName
Process stateState
Process priorityPriority
Snapshot IDSnapshotID
452 Reporting